Bendpak HD-7PXW 7K Lbs Capacity 4-Post Lift (Super-Tall Rise)

BendPak

SKU:
BP-5175516
Condition:
New
Availability:
Special price available for a limited time! Call 800-562-4791 for availability. Free Shipping is valid for commercial locations within the 48 Continental U.S. only.
Shipping:
Free Shipping
Capacity:
7,000 Lbs
Total Price:
MSRP: $8,595.00
$8,145.00
(You save  $450.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendpak HD-7PXW 7K Lbs Capacity 4-Post Lift (Super-Tall Rise)

7,000-lb. Capacity / Super-Tall Rise / Four-Post Lift / Vehicle Display Platform

The HD-7PXW is a literal giant. This four-post lift is also a magnificent display platform and will effortlessly lift up to 7,000 lbs. over 12 feet into the air! Specially made for dealers, it's perfect for stacking taller vehicles and getting them seen!

This lift has a 7,000-lb. lift capacity and 188” long runways to accommodate a variety of vehicle types and wheelbases.

It has all the same safety and convenience features as other BendPak four-post lifts. A one-touch pneumatic safety release instantly releases all locks simultaneously, and the lift's lone hydraulic cylinder is neatly tucked under the power-side runway. There's simply no better-looking and higher-reaching ​car lift on the market than the HD-7PXW.

Features

  • 7,000-lb. maximum lifting capacity.
  • Super tall rise of delivers 12-feet of lifting height.
  • Electric / hydraulic power system.
  • Single hydraulic cylinder mounted underneath runway.
  • Internal anti-sway slider blocks in each column.
  • Oversized self-lubricating cable rollers.
  • Features heavy-duty 3/8” aircraft cable.
  • Rugged 1.25” roller axles.
  • Multi-position safety locks in each column.
  • Adjustable lock ladders.
  • Ramps feature non-skid surface.
  • Push-button pneumatic safety release. 

Specifications

 Capacity  
 Lifting Capacity*  7000 lbs. (3175 kg)
 *Max Capacity / Front Axle  3500 lbs. (1588 kg)
 *Max Capacity / Rear Axle  3500 lbs. (1588 kg)
 Rise  
 A - Min. Runway Height  4,5" (114 mm)
 B - Max. Rise  140" (3556 mm)
 C - Max. Lifting Height  145" (3683 mm)
 Time to Full Rise  60 seconds
 Outside Dimensions  
 D - Overall Width  110,25" (2800 mm)
 E - Outside Length  198" (5029 mm)
 F - Overall Length  224,5" (5702 mm)
 G - Height of Columns  158" (4013 mm)
 Inside Dimensions  
 H - Width Between Columns  100" (2540 mm)
 I - Drive-Thru Clearance  86,5" (2197 mm)
 Runways  
 J - Runway Width  19" (483 mm)
 K - Length of Runways  188" (4775 mm)
 L - Width Between Runways  37,5" (953 mm) or 44,5" (1130 mm)
 M - Runway Centerline  56,5" (1435 mm) or 63,5" (1613 mm)
 N - Outside Edge of Runways  75,5" (1918 mm) or 82,5" (2096 mm)
 Minimum Wheelbase  
 Rated Capacity  135" (3429 mm)
 75% Capacity  115" (2921 mm)
 50% Capacity  95" (2413 mm)
 25% Capacity  80" (2032 mm)
 Locking  
 Locking Positions  30
 Lock Spacing  Every 4" (102 mm)
 Power Unit  
 Motor  208-230 VAC / 50-60 Hz / 1Ph
 Noise  45 dB
 Shipping  
 Weight  2,180 lbs. (988.8 kg)
 Dimensions:  192'' x 22'' x 35'' (4,876 mm x 558 mm x 889 mm)

 

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

2024-04-12-10-27-35-bendpak-hd-7pxw-super-tall-four-post-lift-display-vehicle-lift.png

Downloads

pdf.jpg Manual

pdf.jpg Brochure

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.