GMC HBB-1010NC 10 ft Hydraulic Box and Pan Brake / With NC Controller

GMC Machine Tools

Special price available until February 29th.
Free Shipping
Total Price:
MSRP: $55,850.00
(You save  $500.00 )
Adding to cart… The item has been added

GMC HBB-1010NC 10 ft Hydraulic Box and Pan Brake / With NC Controller


  • ISO 9001 certified.
  • Meet OSHA and CE safety standard.
  • 48” NC table back gauge with fingers.
  • Max. 16 bends per program.
  • Upto 100 Program Storage. 
  • Programmable Angle/ Angle Correct. 
  • NC ram height control for open hemming.
  • Hardened fingers and table. 
  • Rexroth hydraulic system. 
  • Yaskawa Servo motors and Drives. 
  • Schneider electrical components.  
  • All steel construction for maximum rigidity.
  • Hydraulic logic system centrally located and quiet.
  • Safety type foot pedal with handle and E-stop switch. 
  • Safety 24V low voltage & overload protection.  


 Mild Steel
 Stainless Steel
 Hemming max thickness:
 10 Ga.
 14 Ga.
 22 Ga.
 Bending length capacity  10'
 Bend Angel Degree, programmable  135 degree
 Max. Box Depth  6"
 Large Beam Opening/Clamping Opening  3"
 Beam front/back adjustment  1"
 Min. Reverse Bend  1"
 Max. Table Back Gauge Distance
 Min. Table Back Gauge Distance
 Back Gauge Repeatability  0.0039"
 Back Gauge Table Height  35-3/4"
 Assorted fingers  3"
 Main Motor
 Servo Motor for back gauge
 10 HP 3 Phase
 Prewired: 220VAC 35A
 1 HP
 Hydraulic Oil Tank Capacity:
 Recommended hydraulic oil:
 32 Gal.
 Shell #68 or equivalent 
 Machine Weight:
 Shipping weight:
 Machine Dimensions:
 Shipping Dimensions:
 11,550 lbs.
 11,850 lbs.
 175" x 93" x 76"
 163" x  85" x 78"

Warranty Information

GMC Machine Tools Warranty

GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.

We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.

Warranty parts will be shipped free of charge to original purchaser.

Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.

If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.

After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.

GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.

GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.

Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.

We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.

We look forward to being of service now and in the future.