GMC HBB-1010 10 ft Sheet Metal Brake

GMC Machine Tools

Factory Shipped.
Free Shipping
Total Price:
MSRP: $35,820.00
(You save  $5,970.00 )
Adding to cart… The item has been added

GMC HBB-1010 10 ft Sheet Metal Brake


  • ISO 9001 certified.
  • Hydraulic adjustment for opening.
  • Hydraulic power clamping for workpiece.
  • 26” manual back gauge with handwheel.
  • 1” manual beam adjustment (front and back).
  • Min. reverse bend is 3/4” (20mm).
  • Heavy welded all steel construction for maximum rigidity.
  • Rexroth Hydraulic logic system centrally located and quiet.
  • A wide guide body ensures strong, stable, smooth & accurate movement.
  • Central control panels on each side for convenient operation.
  • Jog and auto operation modes.
  • Overload protection and disconnect switch.

Total pieces fingers assortment:

  1. HBB-0410 & 0412: 3”/ 3pcs, 4”/2pcs, 5”/5pcs and 6”/1pc
  2. HBB-0610 & 0612: 3”/6pcs, 4”/3pcs, 5”/6pcs, 6”/2pcs
  3. HBB-0810 & 0812: 3”/6pcs, 4”/4pcs, 5”/10pcs, 6”/2pcs
  4. HBB-1010 & 1014: 3”/6pcs, 4”/4pcs, 5”/10pcs, 6”/6pcs
  5. HBB-10316: 4”/3pcs, 5”/5pcs, 6”/5pcs, 7”/3pcs, 8”/ 4pcs
  6. HBB-1214: 3”/6pcs, 4”/4pcs, 5”/10pcs, 6”/10pcs  


 Max Bending Length  10'
 Mild Steel
 Stainless Steel  12Ga.
 Bend Angle Degree  135
 Max. Box Depth  6"
 Large Beam Opening  3"
 Oil Tank Gal.  120L= 32 Gal
 Main Motor  10 HP
 Weight  8,150 lbs.
 Overall Dimensions  142" x 46" x 69"

Standard Included Equipment

  • Assorted fingers.
  • 26” manual back gauge with one side handwheel operation.
  • Angle set up dial.
  • Hydraulic clamping system.
  • Foot pedal control for hydraulic clamping & auto mode.

Warranty Information

GMC Machine Tools Warranty

GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.

We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.

Warranty parts will be shipped free of charge to original purchaser.

Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.

If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.

After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.

GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.

GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.

Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.

We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.

We look forward to being of service now and in the future.