Challenger Lifts SA10 Symmetric/Asymmetric 10,000 Lbs Two Post Car Lift
- Challenger Lifts
- 10,000 Lbs
Challenger Lifts SA10 Symmetric/Asymmetric 10,000 Lbs Two Post Car Lift
Challenger Lifts’ SA10 features the ability to be configured in either the symmetric or asymmetric position dependant upon the service requirements of your shop. The SA10 features 3-stage front arms that provide maximum extension and retraction ensuring safe and reliable lifting on all vehicles within rated capacity.
With adjustable height and width options, double telescoping screw pads, durable powder coat finish, plated arm restraints and pins and many other appealing features, the SA10 will accommodate the rigorous demands of a full service facility. Available in red and blue please choose above.
Our two post lifts come with accessories to turn your two post vehicle lift into a complete productivity center. All Challenger two post lifts are designed and manufactured to the highest standards for performance, durability and longevity.
- 3-stage front arms provide greater overall arm sweep.
- Padded overhead shut off system prevents vehicle damage from being raised too high.
- Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters.
- Premium powder coat finish provides long lasting durable finish.
- Adjustable heights between 11´ 4-1/4" and 11´ 10-1/2" and adjustable widths 10´ 9" to 11´ 5-1/2" provides versatility at installation for service facilities with spacial constraints.
- Rubber door guards provide added security against vehicle door damage.
- Single-point mechangical lock release system allows technician to disengage both columns simultaneously.
- Mirrored "S" shaped columns provides a clear and sage concave conduit for the bearings.
10,000 lbs. (4536kg)
A Rise Height1
B Overall Height
11' 4-1/2" / 11' 10-1/2" (3467mm / 3620mm)
C Overall Height (Cylinder Extended)
11' 10-1/2" (3620mm)
D Overall Base Width
10' 9" / 11' 3" (2356mm / 2508mm)
10' 11-1/2" / 11' 5-1/2" (3340mm / 3493mm)
E Drive-Thru Clearance
92-3/4" / 98-3/4" (2356mm / 2508mm)
88-1/2" / 94-1/2" (2248mm / 2426mm)
F Floor to Overhead Swith
131-1/8" / 137-1/8" (3331mm / 2483mm)
G Short Arm Reach
22-3/8" - 41-1/2" (3331mm - 1054mm)
H Long Arm Reach2 (min/max)
38-1/4" - 59" (972mm - 1499mm)
I Screw Pad Height
4-3/8" - 6-1/2" (111mm - 165mm)
J Inside of Columns
106-3/4" / 112-3/4" (2711mm - 2864mm)
101-1/2" / 107-1/2" (2578mm - 2731mm)
2HP, Single Phase, 60Hz
208v - 230v
Speed of Rise
Max. Load per Arm
2,500 lbs. (1134kg)
Ceiling Height Required
*Lift capacity ratings are based on loads equally distributed on all four arms.
1 Rise Height is measured with telescoping screw pads in highest position.
2 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm)
3 Overall width of Asymmetric lift is 11' 3"' / 11' 9" including power unit
*Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction*
*Shipping is FREE to direct points within the 48-contiguous states.
***It is the buyer's responsibility to unload the freight at their location.
****The Challenger Lifts SA10 is an ALI Certified Lift. Click here to view its certification.
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
|Description||Model/Series||Labor||Functional Parts||Structural parts||Extended Warranty Available|
|CL10||CL10||1 Year||2 Years||5 Years||Yes|
|10K 2-Post, 9K 2-Post||LE10, SA10, CLFP9||1 Year||1 Year||5 Years||No|
|12K, 15K, 18K 2-Post||CL12, 15000, 18000||1 Year||2 Years||5 Years||Yes|
|8K Inground||EVW0820||1 Year||2 Years||2 years||No|
|10K Ingrounds||EV1020||1 Year||2 Years||5 Years||Yes|
|12K, 15K Ingrounds||EV1220, EV1520||1 Year||1 Year||5 Years||Yes|
|14K 4-Post||4P14||1 Year||1 Year||5 Years||No|
|15K 4-Post||4015||1 Year||2 Years||5 Years||No|
|30K 4-Post Cable Drive||4030||1 Year||2 Years||5 Years||No|
|30K, 40K, 60K Chain Drive||44030, 44040, 44060||1 Year||1 Year||1 Year||No|
|Rolling Jacks||RJ, SAJ||1 Year||1 Year||1 Year||No|
|Mid and Short Rise||MR-6, SRM-10||1 Year||1 Year||1 Year||No|
|Scissors||SX14, DX77||1 Year||1 Year||1 Year||No|
|Mobiles||CLHM||1 Year||1 Year||5 Years||No|
|Replacement Parts||90 days||No|
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.
Frequently Bought Together
Total Price:+ Add to Cart
Please choose options for all selected products