BendPak MDS-6EXT / Open Center / 6,000 Lb. Mid-Rise Scissor Lift

You haven’t experienced state-of-the-art lifting convenience until you’ve used a BendPak mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions.

Using long-wheelbase vehicles as our point of reference, we designed the MDS-6EXT mid-rise lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their opencenter design, just like our standard length MDS-6LP and MDS-6LPF models.

Features

• 6,000-lb. lifting capacity
• Open-center design
• Adjustable arm assemblies
• Solid-steel safety lock bars
• Multiple lock positions
• Hinge-point with Zerk grease fittings
• Low-profile design
• Rubber blocks included
• Removable ramps

Specifications

NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick‐up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height, with the specifications shown before you purchase.

* Special voltage available on request. Design, materials, and specifications shown here are subject to change without notice. Note: An air supply (minimum 50 psi / 10 CFM) is required for the safety-lock mechanisms to disengage. It is solely your responsibility to install and maintain the air supply. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact us at info@jmcautomotiveequipment.com

Downloads

Manual
Specs Sheet

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.