Bendpak HDS18EA 18,000 Lbs Alignment 4-Post Truck Lift


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping
  • BendPak Airline Kit for HD-18E/27X/35X/40X
  • Bendpak DP-30 15 Gallon Rolling Drain Pan
  • Bendpak WSA-100 Optional Air-Electric Workstation, Fits 2-Post & 4-Post Lifts
  • BendPak RJ9W 9,000 Lb. Capacity, Easy-Roll Wheels Rolling Bridge Jack
Total Price:
MSRP: $29,754.00
(You save  $4,959.00 )
Adding to cart… The item has been added


Bendpak HDS18EA 18,000 Lbs Alignment 4-Post Truck Lift

You’re now looking at the largest-capacity alignment lift we make, 18,000 lbs. of lifting power is made possible by manufacturing our cable sheaves, base columns and base plates to be as robust and durable as possible. Of course, it’s all 100% ALI Certified for your safety. When you need to align truck wheels, from light-duty all-terrain trucks all the way to massive dumpster trucks and smaller flat-beds, BendPak’s free-floating slip plates and galvanized steel turn plates make the job easy to get done right the first time.. When you need to align truck wheels, BendPak’s free-floating slip plates and galvanized steel turn plates make the job easy to get done right the first time.

BendPak’s largest-capacity alignment lift easily accommodates vehicles up to 18,000 lbs. Of course, it still services smaller sports cars and race cars without a problem. If your shop is busy and can’t afford the space for multiple lifts, you’ll need the extra lifting power to be ready for those lager trucks and SUVs. The HDS18EA offers the same safety features and rugged design as every other car lift we make, from the aircraft-quality steel cables and enhanced cable sheaves to the adjustable locking heights and slackcable secondary lock system. You’ll also enjoy the best warranty money can buy, which makes this car lift is the very best value of any alignment lift, anywhere.


  • 18,000-lb. lifting capacity.
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493.
  • Multi-caster slip plates.
  • Spring-loaded automatic safety locks.
  • Supersized 12" diameter cable sheaves.
  • Four stainless steel lifting cables.
  • Grease nipples on every sheave and axle.
  • Single hydraulic under-runway cylinder.
  • Integrated hydraulic flow restrictor.
  • Durable powder coat finish.
  • Push-button pneumatic lock release.
  • Secondary lock system on constant guard.
  • Enclosed cables, airlines, safety latches.
  • Multiple adjustable locking positions.
  • Maintenance-free power system.
  • Conveniently located controls.
  • 12" x 12" base plates.
  • Optional rolling jacks available.


 Lifting Capacity*  18.000 lbs. (8165 kg)
 *Max Capacity / Front Axle  9000 lbs. (4082 kg)
 *Max Capacity / Rear Axle  9000 lbs. (4082 kg)
 A - Min. Runway Height  10,5" (267 mm)
 B - Max. Rise  59" (1499 mm)
 C - Max. Lifting Height  71,75" (1822 mm)
 Time to Full Rise  75 seconds
 Outside Dimensions  
 D - Overall Width  153,5" (3899 mm)
 E - Outside Length  257" (6528 mm)
 F - Overall Length  312,75" (7944 mm)
 G - Height of Columns  91,25" (2318 mm)
 Inside Dimensions  
 H - Width Between Columns  133,5" (3391 mm)
 I - Drive-Thru Clearance  109" (2769 mm)
 J - Runway Width  22" (559 mm)
 K - Length of Runways  257,5" (6541 mm)
 L - Width Between Runways  40" (1016 mm) or 45,5" (1156 mm)
 M - Min. 4-Wheel Alignment  83" (2108 mm)
 N - Max. 4-Wheel Alignment  138" (3505 mm)
 O - Max. 2-Wheel Alignment  211" (5359 mm)
 Minimum Wheelbase  
 Rated Capacity  185" (4699 mm)
 75% Capacity  160" (4064 mm)
 50% Capacity  135" (3429 mm)
 25% Capacity  110" (2794 mm)
 Locking Positions  9
 Lock Spacing  every 4” (102 mm)
 Power Unit  
 Motor  220 VAC / 60 Hz / 1 Ph
 Noise  45 dB
 Weight  6,790-lbs. (3,079 kg)
 Dimensions  265'' x 26'' x 38'' (6,731 mm x 660 mm x 965 mm)


Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).



pdf.jpg  Manual

pdf.jpg  Specs Sheet


**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.