Bendpak XPR-10S 10,000 Lb Symmetric Clear Floor Two Post

10,000 Lbs.

Factory Shipped

  • Ranger Rjs-1T 1,650-Lb.High Reach Jack Stand
  • Ranger Rd-9G 9-Gallon Upright Portable Oil Drain
Total Price:
$4,821.00 $3,760.00
(You save $1,061.00)
Free Shipping
Free Shipping

Factory Shipped

Bendpak XPR-10S 10,000 Lb Symmetric Clear Floor Two Post Lift

  • The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that’s ahead of its time and a 10,000-lb. lifting capacity. All height/width variations fit in shops with ceilings higher than 12’, and none of them will crowd your floor while you work beneath a vehicle. Every XPR-10S two-post lift features our telescoping screw pad assembly kit

XPR-10S lifts include:

  • Direct-drive performance
  • Adjustable top beam for wide or narrow installation
  • Top-quality construction and materials, incorporating the latest technology
  • Double-telescoping polyurethane screw pads that are tear and gouge-resistant, reducing operating costs and improving safet.
  • A set of 63 mm stacking adapters is provided with every XPR-10S lift as standard accessories.

XPR-10S Characteristics:

  • Lift Capacity: 10,000 lbs.
  • Height: 145”
  • Width: 132” (narrow config), 145” (wide config)
  • Lift height: 69”
  • Type: Clear Floor

 Bendpak XPR-10 Floorplan


  • 10,000?lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive?thru configuration
  • Double?telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single?piece columns
  • Single?point safety release
  • Drop?end arms provide a lower pad height
  • Dual hydraulic direct?drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self?lubricating dura?glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy?duty 1/2" aircraft?quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4?piece 63 mm stackable adapter set comes standard
  • Triple?telescoping front arms
  • ETL Approved



  • Lifting Capacity* 10,000 lbs. (4,536 kg)
  • *Max Capacity / Front Axle 5,000 lbs. (2,268 kg)
  • *Max Capacity / Rear Axle 5,000 lbs. (2,268 kg)


  • A - Rise: 69" (1,753 mm)
  • B - Rise + Pad Only: 75" (1,905 mm)
  • C - Rise + Pad + 63 mm Adapter: 77.5" (1,969 mm)
  • D - Min. Height + Pad: 6.75" (171 mm)
  • Time to Full Rise: 45

Outside Dimensions

  • E - Height Overall: 145" (3,683 mm)
  • F - Width Overall: 132" (3,353 mm) or 145" (3,683 mm)
  • G - Outside Columns: 126.75" (3,219 mm) or 139.75" (3,550 mm)

Inside Dimensions

  • H - Inside Columns: 105.5" (2,680 mm) or 118.5" (3,010 mm)
  • I - Drive-Thru Clearance: 93" (2,362 mm) or 106" (2,692 mm)
  • J - Floor To Overhead Switch: 141" (3,581 mm)

Arms & Pads

  • K - Front Arm Reach: (MIN) 27.5" (699 mm)
  • K - Front Arm Reach: (MAX) 51.5" (1,308 mm)
  • L - Rear Arm Reach: (MIN) 34" (864 mm)
  • L - Rear Arm Reach: (MAX) 54.5" (1,384 mm)
  • Screw Pad Adjustment: 2" (51 mm)
  • Max Load Per Arm: 2,500 lbs. (1,134 kg)

Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 db

Bendpak XPR-10s Specs

Optional Telescoping Low-Pro arms

The safe and rugged XPR-10-LP two-post lift features our exclusive Low-Pro arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis.

Note: The Low-Pro Arms is NOT True Symmetric  (Click here to see info on the Bendspak XPR-10S-LP Low Profile Two Post Lift)

Bendpak Low Profile Arms

**Bendpak charges taxes to California**

Bendpak Two Post and Four Post Lift Warranty


Better Products – Better Service – Better Value

LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
  • Five Years (60?Months) Warranty on the lift structure
  • Two Years (24?Months) Warranty on the hydraulic cylinder(s) and power unit
  • One Year (12?Months) Warranty on operating components
  • One Year (12?Months) Warranty on electrical components (excluding power unit)
  • One Year (12?Months) Labor Warranty on site or at factory*
  • One Year (12?Months) Free?Shipping** on ground?freight charges related to warranty performance

Limited Warranty

1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty (Product): Any BendPak Two?Post or Four?Post Vehicle Service Lift***
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:

  • Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service Product in accordance with instructions provided in the owner’s manual(s) supplied.
  • Any damage caused by overloading Product beyond rated capacity.
  • Items or service normally required to maintain the Product, i.e. lubricants, oil, etc.
  • Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship.
  • Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings.
  • Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants.
  • Rusted components due to improper maintenance or corrosive environments.
  • Cosmetic defects that do not interfere with Product functionality.
  • Damage due to incorrect voltage or improper wiring.
  • Any failure that results from improper installation or use not according to specifications.
  • Damage caused by disasters such as fire, flood, wind, and lightning.
  • Damage caused by unauthorized attachments or modifications.

6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12 months only.  

7. Responsibilities of Purchaser under this warranty/ notice of claims:

  • Provide dated proof of purchase and maintenance records.
  • In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12?months, must be borne by the Purchaser.
  • Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
  • Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.

8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

9. *As determined by Warrantor in its sole discretion**Free?shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two?Post or Four?Post Vehicle Service Lifts (excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following 1/1/2011.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options
    • Ranger Rjs-1T 1,650-Lb.High Reach Jack Stand
    • Ranger Rd-9G 9-Gallon Upright Portable Oil Drain