Vehicle Specialty Tools

Assenmacher BLUE PUMP HOSE Replacement Pump and Hose Works with AST Drive Line Filler System. The new blue hose will not thread onto the older black pumps.

TRAC Tire Jack If a technician needs to remove or install a tire from a vehicle near the ground, the TRAC Tire Jack simply slides under the tire and carries it off or on the vehicle. There is no need to lift with your back while using the TRAC Tire Jack...

Lisle 72600 Manifold Template Dodge 4.7L Features Removes Broken Exhaust Manifold Bolts On (2000 - 2007) Dodge 4.7L Motors Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move from...

Lisle 72450 Manifold Template Ford 6.2L Features Removes Broken Exhaust Manifold Bolts Without Damaging the Head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move from hole to hole without moving base plate. Drill...

Lisle 72400 Manifold Template GM 6.6L Features Removes Broken Exhaust Manifold Bolts on Duramax 6.6L Diesel Motors up to 2017 Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move...

Lisle 72350 Manifold Template Ford 7.3L Features Removes Broken Exhaust Manifold Bolts on Ford 7.3L Diesel Motors Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move from hole...

Lisle 71650 Manifold Drill KT GM 5.3L & 6.2L Features Removes Broken Exhaust Manifold Bolts on GM EcoTech3 5.3L and 6.2L Motors Without Damaging the Cylinder Head. Tapered bolts Center Base Plate Over Bolt Holes and Slip Fit Bushing allows you to...

Lisle 71600 Manifold Template Ford 4.6L/5.4L & 6.8L Features Removes Broken Exhaust Manifold Bolts on Ford 4.6L, 5.4L and 6.8L V10 2 Valve and 3 Valve Ford Triton Engines Without Damaging the Cylinder Head. Tapered bolts center base plate...

Lisle 71500 Manifold Drill Template Dodge  Features Removes Broken Exhaust Manifold Bolts on Dodge 5.7L Hemi Motors Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move from...

Lisle 71400 Manifold Drill Template For GM 4.8L, 5.3L & 6.0L Features Removes Broken Exhaust Manifold Bolts on GM LS III 4.8L, 5.3L and 6.0L Motors Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit...

Lisle 71350 Manifold Drill Template For Ford 6.0L & 6.4L Diesel Features Removes Broken Exhaust Manifold Bolts on Ford 6.0L and 6.4L Motors Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit bushing...

Lisle 69930 Hd Turbo Test Kit W/ Smoke Adp Features Includes T-Adapter for Connecting Smoke Machines to Help Locate Air Leaks in the Components. Plugs the output side of the turbo and the intake inlet. Air and smoke are applied through one adapter to...

Lisle 69910 Turbo Test Kit W / Smoke Adapter Features Includes t-adapter for connecting smoke machines to help locate air leaks in the components. Plugs the output side of the turbo and the intake inlet. Air and smoke are applied through one adapter to...

Assenmacher ATFEURO10 Eruo Driveline Fluid Filler Set w/ 8L Drum Specifications: Used only to Fill, Not to Drain, So Clean Fluid Stays Clean 8 Liter Capacity Quick Attachment Adapters Hand Pump Dispenses Efficiently On/Off Ball Valve Container made in...

Assenmacher F1655 Ford 3.5L (gen2) Eco-Boost Timing Set Specifications: Comparable to Factory Tool #303-1655 Camshaft Holding Fixtures for Ford/Lincoln models with the newly updated version of the 3.5L Ecoboost engine [2017-2021]. Ford earlier models,...

Assenmacher BMW11720 BMW N20 Balance Shaft Tool Specifications: Comparable to #2 318 117, #2 212 825 and #11 4 120. Used to remove and fit the Balance Shaft. Includes tool for positioning the Balance Shaft when at top dead center (TDC). This is only...

Assenmacher BMW74220 BMW Crankshaft Holder Specifications: Comparable to #2 222 742 Used to lock crankshaft for BMW N20 Engine when removing Vibration Damper. Tool Applications for Individual Tools listed below (List includes applications for all tools...

Assenmacher 200-18 18mm Stud Extractor/Installer Specifications: 3/4" Drive 36mm Hex Applicable to Cummins ISX Head Bolts. Tool Applications for Individual Tools listed below (List includes applications for all tools included. Some models appear...

Assenmacher VM138 Volvo/Mack Engine Barring Socket Specifications: 1/2” Drive or 24mm Socket Comparable to #88800014 and #88840317 Used for turning the crank shaft on Volvo D11, D13, D16 & Mack MP7, MP8, MP10 engines. Tool Applications for...

Assenmacher OFHC5767 Hemi/Cummins Funnel and Adapter Specifications: Funnel Made in USA Applicable to Dodge/RAM 5.7L Hemi and trucks with 5.9L / 6.7L Cummins diesel engines. For 2021 Mack Truck MD, the #OFAAGM-2, 45° Elbow is required in addition to...

Assenmacher OFBM2020 Oil Funnel Specifications: Made in USA Applicable to newer BMW (B-Series), Mercedes (M256) and Mini Cooper (B-Series) engines with the oil fill caps that have 4 locking notches. Tool Applications for Individual Tools listed...

Assenmacher VW1024 Socket for 4/3 Way Valve on 2.0L Turbo Camshafts Specifications:  Made in U.S.A. Comparable to factory tools #T10352/2 and #T10352/4. Used for removing and installing the 4/3-way central valve of the variable valve timing...

Assenmacher OFCM-1 Cummins/Hemi Oil Funnel Adapter Specifications: Used in conjunction with #FUN19KIT Applicable to Dodge 5.7L Hemi and 5.9L/6.7L Cummins diesel engines. Funnel adapter is used with our #FUN19KIT or with our #FUN14FUNNEL (must be...

Assenmacher MSP1420 Magnetic Spark Plug Socket Specifications: Magnetic 14mm, 12 point 3/8" Drive Comparable to BMW # 121220 Manufactured to accommodate more vehicles where the spark plug has a thicker ceramic insulator and wider terminal nut. Fits...