Baileigh HSP-30M-C Two Station Hydraulic Press
With its additional work station, sturdy plate steel construction and piston-style hydraulic pump, this hydraulic H-frame press offers one of the best values on the market.
- 30-ton capacity on main press.
- 10-ton capacity on side press.
- 27.5” working width.
- 5.74” diameter cylinder with 9.8” stroke on main press.
- 2.76” diameter cylinder with 7.75” stroke on side press .
- 3 hp motor runs on 200-volt single-phase power.
- Main cylinder can move left and right within the frame to deliver pressure at the point where you need it for off-center projects.
- Comes standard with dual pressure gauges.
- Includes 2-piece V-block.
|Return Speed||.30" / sec. (Main), .60"/ sec. (Side)|
|Piston Head Diameter||2" (Main), 1.97" (Side)|
|Pump Speed||.95 gal/min|
|Oil Capacity||13 gal.|
|Working Speed||.25" / sec. (Main), .78" / sec. (Side)|
|Maximum Capacity||30 ton (Main), 10 ton (Side)|
|Cylinder Stroke||9.8" (Main), 7.75" (Side)|
|Cylinder Movable||Yes (Main)|
|Cylinder Diameter||5.74" (Main), 2.76" (Side)|
|Distance From Table To Ram||Min. 8.25" - Max. 40.25" (Main), Min. 7.25" - Max. 43.25"|
|Power||220 Volt Single Phase|
|Shipping Dimensions (Inches)||78x48x80|
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791