Baileigh HSP-110M-1500-HD hydraulic workshop press
*Images for reference only.
With a welded cast-steel framework, this hydraulic press is a must-have for any engineering workshop, repair firm, or technical training institutions.
Recommended for: General assembly, straightening work, testing workpieces, and pressing bearings in and out.
Features
- 110-ton maximum capacity.
- 59” working width.
- 8”-diameter cylinder with 13.75” stroke.
- 10 hp motor runs on 220-volt 3-phase power.
- 2 speeds and pressure regulator let you adjust to suit a given project.
- Cylinder moves left and right within the frame for off-center parts.
- Effortlessly adjust the height of the heavy work table using the hydraulic cylinder and lifting chains.
- 4.09” chrome piston with automatic return saves time after you’re finished applying pressure.
- Typically kept in stock for fast shipping.
- Delivery in accordance with CE standards.
Specifications
| Model Number | HSP-110M-1500-HD |
| Weight (Lbs.) | 4240 |
| Cylinder Movable | Yes |
| Maximum Pressure (PSI) | 4375 psi |
| Minimum Return Speed (In./Sec) | .23" / sec. |
| Piston Diameter (In.) | 4.09" |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
