Baileigh HSP-66M-HD hydraulic press
Baileigh HSP-66M-HD hydraulic press
Weighing in at just over 1750 pounds, this motorized H-frame press is built to last. Its welded .375” plate steel structure can handle all the hydraulic system’s force without flexing.
- 66 tons of hydraulic force.
- 40.94” working width.
- 9.85” cylinder stroke.
- Runs on 220 volt 3-phase power.
- Robust 5.3 hp motor runs on has 2 working speeds: rapid descent and slow approach.
- Hand pump gives you the option for even finer control.
- Cylinder moves left or right within the framework to deliver pressure on off-center parts.
- 7.08”-diameter cylinder automatically returns to the top once the job is done.
- 53.34” table fabricated to exacting tolerances.
- Table features 2 support pins that are 2” in diameter, letting you lock the table in at the correct working height.
- Lifting chains help with the placement of the table and save you muscle strain.
- Includes pressure regulator and ram cap.
|Return Speed||.393" / sec.|
|Maximum Pressure||3814 psi|
|Piston Head Diameter||3.94"|
|Pump Speed||.871 / 3.619 / gal/min.|
|Oil Capacity||7.92 gal|
|Working Speed||.086" / sec.|
|System Oil Capacity||2.11 gal|
|Lowering Speed||.362" / sec.|
|Maximum Capacity||66 tons|
|Power||220V / 3-phase|
|Shipping Dimensions (Inches)||96x48x95|
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message:
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
Frequently Bought Together
Total Price:Add to Cart
Please choose options for all selected products