Auto Twirler At-Elite-R-Assy Elite Auto Rotisserie
The Auto Twirler ELITE is our original height adjustable rotisserie model. There are literally thousands of these models in the market as it has been the most popular rotisserie for many years.
The hydraulic jacks will allow you to pick the car body or frame up from 20” off the ground. The base is fully welded together for strength and long term durability.
The balancer is done with a 3/4“ Acme rod with a real wide thread, made for lifting, used as a screw jack. Please note that Acme thread is a wide thread which is formed and not cut; it is made for lifting, unlike all-thread. The weight is secured by L & W brackets Note, we use A325 structural grade bolts, on all of our equipment to prevent stripping out or damage.
The AutoTwirler ELITE was used by the US Army to remanufacture Humvees. It is used by another defense contractor to build their equipment. It is used by the Big 3 auto companies in their quality control and training areas. It is used by West Coast Customs, Chip Foose, Bryan Fuller, Ring Brothers, Detroit Speed, and many other restorers. It was X-rayed and verified by a government engineering contractor in Texas who then sold it as part of their project to NASA. The design of this unit was confirmed by this company in 2009 and it passed as it was. Since then, we have made the swing arm thicker, the gussets on the swing arm wider, changed the retaining bolt in the pivot to a ball bearing retainer, and changed the caster supplier. So, if you want to know the truth about our equipment, please ask us or investigate for yourself. Overall, this is a great rotisserie.
Specifications
| Weight | 525 lbs |
| Dimensions | 63 × 58 in |
| Material | 3,000 lbs. capacity. Height adjustable model made of 3” square tubing. The horizontal member of the swing arm is 3/16” thick. |
| Mounting Height | 20" Minimum Mounting Height, 14" with casters removed from the AutoTwirler ELITE. |
| Mounting Arms | 4 – 16" Mounting Arms. |
| Center Bar | 3 piece telescoping center bar allowing 19' of extension. |
| Casters | Six (6) – 5" Heavy duty poly on cast iron at 880 lbs. each, includes 4 caster locks. Optional 8” caster upgrade. |
| Hydraulic Jack | Two (2) – 3 ton, long ram hydraulic jacks for working height adjustment. 20” stroke. Optional 5 ton jack upgrade. |
| Storage | 72" x 30" x 58" |
| Made in the USA | The Auto Twirler ELITE is manufactured in Utah, The Auto Twirler ELITE ships bare steel. Powder Coating is available in red or blue for an additional cost. |
Downloads
1 year Limited Warranty
Every AutoTwirler has a 1 year warranty on the jacks and casters and a 1 year warranty on steel components against manufacturing defects from the date of purchase.
Mis-use
This warranty does not cover mis-use, not following instructions, or items that have been altered in any way.Replacement items are available, at a cost, if needed.
Non Transferable
This warranty is not transferable and must have proof of purchase.
Registering Product
If you purchased your unit thru a JMC Equipment, we highly recommend that you register your product with Auto Twirler by mailing, emailing, or faxing your receipt with your name, address phone and date of purchase.
