Auto Twirler At-Pro-Assy Pro Auto Rotisserie

Auto Twirler

Factory Shipped.

Total Price:
$2,303.34 $2,032.36
(You save $270.98)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped.

Auto Twirler AT-PRO-ASSY PRO Auto Rotisserie

The AutoTwirler PRO is The Most Advanced Automotive Rotisserie in our line up, and in our opinion, the best in the world. It is so advanced and is so much better than anything else on the market, we decided to patent its design. New Mounting Arms, New Pivot Point, New Balancing Kit, New Wheels. Nothing else even comes close.

The base is fully welded together for strength and long term durability.

The balancer is unique and an envy of our competitors. It is made with our 3/4” Acme rod but it is the only design that is bi-directional. If the car becomes top heavy (although it never should), this is the only balancer than can drive the balance point back upside down and re-balance the car.

We are using laser cut clamps on all of the transitions. Our other models use tubing over tubing. Our clamps tighten in 2 directions and use short bolts to prevent mis-alignment or sagging. They clamp down tight on all 4 sides of the 3“ tubing.

The wheels are 5” heavy duty poly-on-cast-iron casters with an optional 8” upgrade.


 Weight  520 lbs
 Dimensions  63 × 58 in
 Material  3,000 lbs. capacity. Height adjustable model made of 3” square, mostly 3/16“ thick tubing.
 Mounting Height  21" Mounting Height, 14" with casters removed from Twirler.
 Mounting Arms  4 – 16" Mounting Arms designed with a full clamp design, clamping completely around the tubing. It is attached to, thereby eliminating any gap or clearance caused by tubing sizes.
 Center Arm  3 piece telescoping center bar allowing 19' of extension.
 Casters  Six (6) – 5" Polyurethane-on-Cast Iron Casters rated at 880 lbs. each, includes 4 caster locks. Optional 8” caster upgrade.
 Hydraulic Jacks  Two (2) – 3 ton, long ram hydraulic jacks for working height adjustment. 20" stroke.  Optional 5 ton jack upgrade
 Balancers  Two (2) Bi-Directional Balancer Kits, including acme threaded rod.
 Ball Bearings  Ball Bearing Pivot with a full 360 degree locking device; sealed.
 Made in the USA  The Auto Twirler Pro is manufactured in Utah The Auto Twirler PRO ships bare steel. Powder Coating is available in red or blue for an additional cost.
 Storage  72" x 32" x 58"


Specs Sheet
Assembly Instructions
Additional Instructions

1 year Limited Warranty

Every AutoTwirler has a 1 year warranty on the jacks and casters and a 1 year warranty on steel components against manufacturing defects from the date of purchase.


This warranty does not cover mis-use, not following instructions, or items that have been altered in any way.Replacement items are available, at a cost, if needed.

Non Transferable

This warranty is not transferable and must have proof of purchase.

Registering Product

If you purchased your unit thru a JMC Equipment, we highly recommend that you register your product with Auto Twirler by mailing, emailing, or faxing your receipt with your name, address phone and date of purchase.


Frequently Bought Together

Please choose options for all selected products

  • Choose Options