iDEAL TP10KAC-DX 10,000 Lb Two Post Clear Floor BI-symmetrical Lift - Ali Certified
- 10,000 Lbs
Factory Shipped. Delivery Time: 5-7 Business Days
Factory Shipped. Delivery Time: 5-7 Business Days
Tuxedo TP10KAC-D 10,000 lb Two Post Clear Floor Asymmetrical Lift
The secure and rugged Tuxedo TP10KAC-D car lift is a two-post asymmetrical clear-floor model. Configurable lifting arms can be moved to maximize door-opening clearance and to offset vehicles with dramatically unbalanced weight distribution. But this asymmetrical two-post Tuxedo lift's benefits don't end there.
When you're ready to get serious about automotive lifting, you've got to go with an ALI/ETL certified lifting unit like the Tuxedo TP10KAC-D 10,000-lb Capacity Two Post Clear Floor Asymmetrical car lift. This Tuxedo lift has passed rigorous third party inspection. And not just any third party inspection. The ALI/ETL lift certification is the only testing and certification recognized by the United States government.
The TP10KAC-D two-post lift by Tuxedo also features a wear and tear reducing direct-drive design that removes the need for chains or roller bearings that often give out at the worst possible moment. Plus the two-post column construction is a single, solid, continuous piece of rolled steel. You won't find any cheap sheet metal on this Tuxedo lift. And to save you even more time and hassle, the Tuxedo lift sports an extra long 44-inch carriage to dramatically reduce stress on the slider blocks.
The Tuxedo lift's electrical lines are all stored above the arms inside the overhead bar that doubles as a padded cut-off bar. Now you don't have to worry about a nasty, expensive surprise with those taller sprinter vans AND your floor area is kept tidy with fewer tripping hazards to get in the way of vehicle service. An additional safety feature from Tuxedo is the two-point lock release to reduce accidents in the workplace.
Naturally all necessary hardware to assemble the TP10KAC-D Tuxedo Lift comes free. But this two-post Tuxedo lift also comes with a complete package of stackable truck adapters to further expand its usefulness. Truck adapter package includes 1-1/2 inch, 3 inch and six inch sizes.
|3 Stage Front Arms and 2 Stage Rear Arms|
180 Front Arm Rotation
|Rubber Door Guards and Spin Up Pad Adapters|
- Bi-Symmetric Arm Design
- Offset Three Stage Short Arm
- Low Profile Lifting Arms
- Adjustable Spin Up Pads
- Single Point Lock Release
- Rigid Single Piece Column
- Direct Pull Hydraulic Cylinder
- Rubber Door Guards
- Padded Overhead Shutoff
- Truck Adapters Included
|Overall Width||137 3/16″|
|Overall Width w/Power Unit||145 1/2″|
|Minimum Ceiling Height||12′|
|Low Pad Height||4″|
|Max. Lift Height||71″|
|Max. Lift Height w/Tallest Adapter||76 1/2″|
|Width Between Columns||116″|
|Drive Thru Width||104″|
|Floor to Overhead Shutoff||136″|
|Arm Reach Front||23″ – 45″|
|Arm Reach Rear||41″ – 57″|
|Maximum Load Per Arm||2,500 lbs|
|Electric Power Unit||220VAC, 20 Amp, 1 Phase|
|Rise Speed||50 Seconds|
|Minimum Concrete||4 1/4″ / 3000PSI|
|Operating Pressure||3,050 PSI|
|Shipping Weight||1,705 lbs.|
|Shipping Dimensions||140″ L X 19″ W X 40″ T|
Tuxedo collects Sales Tax on all orders shipped to California!
TUXEDO DISTRIBUTORS LIMITED WARRANTY
The following parts and structural components carry a five year warranty:
Columns, Arms, Uprights, Swivel Pins
Legs, Carriages, Overhead Beam
Tracks, Cross Rails, Top Rail Beam
Limited One-Year Warranty:
Tuxedo Distributors, LLC (Tuxedo) offers a limited one-year warranty to the original purchaser of Lifts and Wheel Service equipment in the United States and Canada. Tuxedo will replace, without charge, any part found defective in materials orworkmanship under normal use, for a period of one year after purchase. The purchaser is responsible for all shipping charges. This warranty does not apply to equipment that has been improperly installed or altered or that has not beenoperated or maintained according to specifications.
This warranty does not cover:
1. Parts needed for normal maintenance
2. Wear parts, including but not limited to cables, slider blocks, chains, rubber pads and pulleys
3. Replacement of lift and tire changer cylinders after the first 30 days. A seal kit and installation instructions will be sent for repairs thereafter.
4. On-site labor
Upon receipt, the customer must visually inspect the equipment for any potential freight damage before signing clear on the shipping receipt. Freight damage is not considered a warranty issue and therefore must be noted for any potential recovery with the shipping company.
The customer is required to notify Tuxedo of any missing parts within 72 hours. Timely notification must be received to becovered under warranty.
Tuxedo will replace any defective part under warranty at no charge as soon as such parts become available from the manufacturer. No guarantee is given as to the immediate availability of replacement parts.
Tuxedo reserves the right to make improvements and/or design changes to its lifts without any obligation to previously sold, assembled or fabricated equipment.
There is no other express warranty on the Tuxedo lifts and this warranty is exclusive of and in lieu of all other warranties,expressed or implied, including all warranties of merchantability and fitness for a particular purpose.
To the fullest extent allowed by law, Tuxedo shall not be liable for loss of use, cost of cover, lost profits, inconvenience,lost time, commercial loss or other incidental or consequential damages.
This Limited Warranty is granted to the original purchaser only and is not transferable or assignable.
Some states do not allow exclusion or limitation of consequential damages or how long an implied warranty lasts, so the above limitations and exclusions may not apply. This warranty gives you specific legal rights and you may have other rights, which may vary from state to state.
Frequently Bought Together
Total Price:+ Add to Cart
Please choose options for all selected products