Dent Fix Equipment DF-FBS20 Angled Finger Belt Sander
The DF-FBS20 Angled Finger Sander gives you more contact area on the work surface compared to a straight arm finger sander. A specially designed arm, positioned at the perfect angle, allows for more clearance and the finger sander to lay flatter against the surface. The result is a more complete sanding and smoother surface.
A light compact design and adjustable speed motor gives the technician more control. A 9”, 229mm length arm helps it get into deeper, hard to reach areas. A removable arm guide allows the user to sand a specific distance from edges, angles and corners. The arm rotates 360º to allow access into tight areas, and to fold the tool in half for storing.
Application
Designed to lay flat on a panel while sanding and to reach areas with limited access or maneuverability. General automotive sanding.
Feature & Benefits
• ANGLED ARM - Flatter and smoother surfaces with less imperfections.
• ARM ROTATES - 360º of articulation allows for the best approach in tight spaces and tool storage in smaller areas.
• SPEED CONTROL- Allows you to adjust the RPM according to the job.
• REMOVABLE ARM GUIDE - Sand a specified distance from the edge or remove completely.
Specifications
MOTOR: PNEUMATIC
PSI: 90 PSI
ARM LENGTH: 9”
BELT SIZE: 10mmx508mm
ARM ROTATION: 360
WARRANTY: 12 Months
Storage
Disengage the arm lock to rotate the arm into a fold-able position for convenient storage. Best practice is to store in cool, dry location like a toolbox, drawer, or cabinet.
WARRANTY POLICY
Used Product Warranty Claims: A product is considered used when it has been used for more than 1 week and is no longer re-sellable. All used product warranty claims are to be returned to Dent Fix freight pre-paid. All used product will be repaired or replaced and returned to you via regular freight pre-paid. Expedited return shipments are sent freight collect. Whether to repair or replace is at our sole discretion.
Air Tools: All our air tools carry a 1-year warranty against manufacturing defects. Customer abuse, such as a lack of proper maintenance, and the damage caused therein is not covered under warranty.
?
Consumable: Any item that by its nature or design that wears, gets used up or is permanently changed by its usage is considered a consumable item. Drill bits are a consumable item and as such carry no warranties expressed or implied. There are several procedures the user can implement in order to extend drill bit life, but ultimately the drill bit will break or dull. It is up to the technician to ensure proper usage.
Items with Specific Warranties:
DF-1 Stud Welder: Lifetime – Chuck of slide hammer & Transformer. 5 year – Trigger switch.
DF-505 “The Maxi”: 5 years on internal components.
DF-601 Surge Protector: Lifetime – return for replacement if red L.E.D. does not light.
DF-900W Aluspot Stud Welder: 5 Years - Internal components.
DF-SPR67 Self-Piercing Riveter: 1 Year - Internal components.
DF-EZN1 & DF-EZN1G EZ Nitrogen Welders - 5 Years - Internal components.
Other warranties may apply, please check your product sheet for more information. This warranty does not apply where: repairs have been made or attempted without the assistance of or by an authorized Dent Fix Repair Center; repairs are required because of normal wear and tear; the tool has been abused or misused or improperly maintained; alterations have been made to the tool.
In no event shall DENT FIX be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of the warranty.
DENT FIX disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose”, after the term of this warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
?
QUESTIONS PLEASE CALL 800-562-4791
