Dent Fix Equipment DF-900PF Pull Finger
- Dent Fix Equipment
Dent Fix Equipment DF-900PF Pull Finger
The DF-900PF is an innovative pull finger that attaches to a welded pin for dent pulls on automotive aluminum panels. Simply slide the pull finger over the stud to engage. The slide finger will hold onto the stud until it is disengaged by pressing the release lever. Dent Fix pull fingers are quicker to attach and disengage than screw-on type pull fingers.
Attach a pull devices to the fingers for a reliable and sturdy pull. For crease pulls, multiple pull fingers can be used together when attached to welded studs in a row. A bar can then be fed through the pull finger eyelet and attached to a bridge puller.
Dent Fix's Pull Finger, when used with Dent Fix Alu-Studs DF-900PS and DF-900PM, is also adjustable. Due to the extra length of the Alu-Stud pin, the pull finger can slide up or down the pin if an adjustment needs to be made mid-pull. This adjustment feature is not available when using screw-on fingers.
For use with Dent Fix M4x25mm sized Alu-Studs only.
Alu-Studs are welded onto the aluminum sheet metal using the DF-900B Aluspot Mini, DF-900DX AluSpot and DF-900DX/E AluSpot Extended Aluminum Repair Systems.
WARNING: Cancer and Reproductive Harm
Used Product Warranty Claims: A product is considered used when it has been used for more than 1 week and is no longer re-sellable. All used product warranty claims are to be returned to Dent Fix freight pre-paid. All used product will be repaired or replaced and returned to you via regular freight pre-paid. Expedited return shipments are sent freight collect. Whether to repair or replace is at our sole discretion.
Air Tools: All our air tools carry a 1-year warranty against manufacturing defects. Customer abuse, such as a lack of proper maintenance, and the damage caused therein is not covered under warranty.
Consumable: Any item that by its nature or design that wears, gets used up or is permanently changed by its usage is considered a consumable item. Drill bits are a consumable item and as such carry no warranties expressed or implied. There are several procedures the user can implement in order to extend drill bit life, but ultimately the drill bit will break or dull. It is up to the technician to ensure proper usage.
Items with Specific Warranties:
DF-1 Stud Welder: Lifetime – Chuck of slide hammer & Transformer. 5 year – Trigger switch.
DF-505 “The Maxi”: 5 years on internal components.
DF-601 Surge Protector: Lifetime – return for replacement if red L.E.D. does not light.
DF-900W Aluspot Stud Welder: 5 Years - Internal components.
DF-SPR67 Self-Piercing Riveter: 1 Year - Internal components.
DF-EZN1 & DF-EZN1G EZ Nitrogen Welders - 5 Years - Internal components.
Other warranties may apply, please check your product sheet for more information. This warranty does not apply where: repairs have been made or attempted without the assistance of or by an authorized Dent Fix Repair Center; repairs are required because of normal wear and tear; the tool has been abused or misused or improperly maintained; alterations have been made to the tool.
In no event shall DENT FIX be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of the warranty.
DENT FIX disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose”, after the term of this warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
QUESTIONS PLEASE CALL 800-562-4791
Frequently Bought Together
Total Price:Add to Cart
Please choose options for all selected products