BendPak RJ9W 9,000 Lb. Capacity, Easy-Roll Wheels Rolling Bridge Jack
BendPak’s 9,000-lb. capacity rolling bridge jack is ideal for use on the HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity. This jack is ideal for heavier trucks and SUVs.
This scissor-style rolling bridge jack accessory is designed to jack vehicles quickly and easily. Raise 2 or 4 wheels off the car lift runways, so repair and maintenance jobs like brake and suspension work is easier than ever. Exclusive telescoping rollers allow the runways to be adjusted for varying tread widths, so there’s no need for adapters to work on a range of vehicles. Reaching the factory approved jacking points is easy with an RBJ9000—the precision rollers enable quick positioning anywhere beneath the vehicle.
BendPak rolling jacks for four-post car lifts are designed to be there when you need them and gone when you don’t. Just remove your RBJ9000 when you want the tires set back on the car lift runways. Each jack comes complete with three safety-lock positions and stackable pad adapters for extra clearance when needed.
Features
- 9,000-lb. lifting capacity
- Easy-Roll Wheels
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
Specifications
Capacity | |
Lifting Capacity | 9,000 lbs. (4,082 kg) |
Suitable Lift Model(s) | HDS-18E, HDS-27 Series |
Min. Drive-Over Height* | |
Pad Only: | 5.25" (133 mm) |
Pad + 2.75" Adapter: | 8" (203 mm) |
Pad + 5.5" Adapter: | 10.75" (273 mm) |
Max. Lifting Height* | |
Pad Only: | 16.25" (413 mm) |
Pad + 2.75" Adapter: | 19" (483 mm) |
Pad + 5.5" Adapter: | 21.75" (552 mm) |
Reach | |
Support Base Width: | 45" (1,143 mm) - 50" (1,270 mm) |
Max. Arm Reach: | 56" (1,422 mm) |
Min. Arm Reach: | 42" (1,067 mm) |
Time to Full Rise: | 55 seconds |
Pump: | Air/Hydraulic |
Air Pressure: | 125 PSI (10-25 CFM) |
Max. Operating Hydraulic Pressure: | 5,020 PSI |
Power Requirement: | None |
Shipping Weight: | 478 lbs. (217 kg) |
Shipping Dimensions: | 47" x 25" x 15" (1,206 mm x 635 mm x 381 mm) |
Download
ManualSpec Sheet
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.