BendPak 4,500 Lb. Capacity, Easy-Roll Wheels, LOW-PROFILE Rolling Bridge Jack
The RJ45LP rolling bridge jack is ideal for any shop with the HD-7 series or HD-9 series four-post lift model, arguably the most popular and versatile four-post car lifts on the market. Featuring an impressive low-profile design, the RJ45LP lift pads sit just 4.25" from the runway surface and is equipped with easy-to-roll wheels for effortless gliding down the runway track. For those with an HD-7 or HD-9 four-post lift that are in need of wheel service capability, the RJ45LP offers extreme versatility and convenience, in a low-profile package.
The RJ45LP and RJ45W rolling bridge jacks are essentially the same except for two specifications: First, the RJ45LP minimum drive-over height is 4.25" and the RJ45W minimum drive-over height is 4.5". Second, the RJ45LP maximum arm reach is 61" wide and the RJ45W maximum arm reach is 57" wide.
Features
- 4,500-lb. lifting capacity.
- Easy-Roll Wheels.
- Low-profile minimum drive-over height, wider reach lifting points.
- Rubber contact pads.
- Stackable adapters.
- High-pressure hydraulic power unit.
- Optional air-line kit.
Specifications
| Lifting capacity | 4,500 lbs. (2,041kg) |
| Minimum Drive-Over Height (Pad only) | 4″(100 mm) |
| Maximum Lifting Height (Pad only) | 14.85″(377.2 mm) |
| Minimum arm reach | 42″(1,068 mm) |
| Maximum arm reach | 61″(1,549 mm) |
| Maximum operating hydraulic pressure | 2,490 psi |
| Minimum operating air pressure required | 100 psi |
| Shipping weight | 306 lbs. (139 kg) |
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Note: air-hydraulic pump requires 125 psi and 10–20 CFM.
Downloads
