BendPak HD-7500BLX 7,500 Lb. Capacity / Vehicle & Boat Storage Lift / 82" Rise
Dry-docking, parking, and elevated storage are the core strengths of the BendPak HD-7500BLX, a 7,500-lbs. capacity extended-height boat and vehicle storage lift. With adjustable runways and high-rise storage capability, the HD-7500BLX helps marinas, garages, and storage facilities keep boats, cars, and trucks safely lifted and protected.
Features
- 7,500-pound lifting capacity.
- Two different lifting heights to choose from.
- Electric / hydraulic power system.
- Internal anti-sway slider blocks in each column.
- Both models feature heavy-duty 3/8" aircraft cable.
- Multi-position safety locks in each column.
- Ramps feature non-skid surface
- Runways include rail-kit for optional accessories.
- Single hydraulic cylinder underneath runway.
- Over-sized self-lubricating cable rollers.
- Rugged 1-1/4" roller axles.
- Adjustable lock ladders.
- Push-button pneumatic safety release.
- Durable powder coat finish.
Specifications
| Lifting Capacity | 7500 lb |
| A Min Runway Height | 5 in |
| B Max Rise | 82 in |
| C Max Lifting Height |
85.75 in
|
| D Width | 132 in |
| E Outside Length | 198 in |
| F Overall Length | 224.5 in |
| G Height | 100 in |
| H Inside Columns | 122 in |
| I Drive-Thru Clearance | 108.5 in |
| J Runway Width | 19 in |
| K Runway Length | 182.25 in |
| L Width Between Runways | 46.5 - 66.5 in |
| M Runway Centerline | 68.5 - 88.5 in |
| N Outside Edge of Runways | 87.5 - 107.5 in |
| Rated Wheelbase Capacity | 135 in |
| 25% Capacity | 80 in |
| 50% Capacity | 95 in |
| 75% Capacity | 115 in |
| Locking Positions | 17 |
| Locking Spacing | 4 in |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level |
45 dB
|
| Shipping Dimensions | 22 x 191 x 27 in |
| Shipping Weight |
1922 lb
|
| Shipping Method |
Flatbed
|
| Offload Requirement |
Forklift
|
*Specifications subject to change without notice.
1. The Lift supports less weight than its rated capacity as the Vehicle’s wheelbase is reduced. This reduction in capacity is due to the vehicle’s wheels moving closer to the middle of the Runways, where less structural support exists. For example, the maximum weight allowed on the HD-75BXT for a Vehicle with a wheelbase of 110 inches is 50 percent of the Lift’s rated capacity or 3,750 lbs.
2. The Safety Ladder fasteners extend horizontally past the Post by .75 in. / 19 mm on all four Posts. This larger dimension should not be used to create the Chalk Lines for the Lift Installation, but the additional clearance is required around all four Posts.
3. The Safety Ladder adjustment adds an additional 3.25 inches max. to the Post height.
WARNING: California Prop 65
Downloads
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.
Videos Hide Videos Show Videos
- Free Shipping:
- Yes
CALL US NOW
