Challenger Lifts SA10 Symmetric/Asymmetric 10000 Lbs Two Post Car Lift

Challenger Lifts

Factory shipped
Free Shipping
10,000 Lbs
  • Challenger Lifts B10264A Air/Electric Workstation With Filter/Lubricator and regulator
  • Challenger Lifts 10315 Stack Adapter Kit For 10000 And 12000 Lb Lift
Total Price:
MSRP: $7,873.47
(You save  $2,834.45 )
Adding to cart… The item has been added

Challenger Lifts SA10 Symmetric/Asymmetric 10,000 Lbs Two Post Car Lift


Challenger’s SA10 2-post lift offers 10,000 lb. capacity. You can install the SA10 in either symmetric or asymmetric position, depending on your service needs. The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep.

Features and Benefits

  • 10,000 lb. lift capacity
  • 3-stage front arms provide greater sweep for versatility and ease of spotting
  • Can be installed in either symmetric or asymmetric position, depending on your service needs
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • Adjustable heights and widths provide versatility at installation for service facilities with special constraints
  • Single-point mechanical lock release system allows technician to disengage both columns simultaneously
  • Padded overhead shut off system prevents vehicle damage
  • Premium powder coat finish provides long-lasting durability
  • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
  • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage


 Model Number  SA10 symmetric install  SA10 asymmetric install
 Lifting Capacity  10,000 lbs.  10,000 lbs.
 Lifting Configuration  Symmetric  Asymmetric
 Arms  3-stage front/2-stage rear  3-stage front/2-stage rear
 Rise Height  74.5”  74.5”
 Overall Height  136.5” / 142.5”  136.5” / 142.5”
 Overall Height (Cylinder Extended)  142.5”  142.5”
 2’ Height Extension Available  Yes  Yes
 Overall Width  129” / 135”  131.5” / 137.5”
 Drive-Thru Clearance  92.75” / 98.75”  88.5” / 94.5”
 Floor to Overhead Switch  131.125” / 137.125”  131.125” / 137.125”
 Front Arm Reach  22.375” / 41.5”  22.375” / 41.5”
 Rear Arm Reach  38.25” / 59”  38.25” / 59”
 Screw Pad Height  4.75” / 6.875”  4.75” / 6.875”
 Inside Columns  106.75” / 112.75”  101.5” / 107.5”
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph  2HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise  43 s  43 s
 Ceiling Height Required  12’  12’
 ALI/ETL Certified  Yes  Yes
 Colors Available  Red, Blue  Red, Blue

Additional Parts and Accessories

 Productivity Accessories
 Part No.  Description
 B10264A  Air/electric workstation with filter/lubricator/regulator
 B99700  Tire Tool Manager Work Station with filter/lubricator/regulator
 TR-07  Turf Rail Quick Change Attachment
 SA10EH2  Optional 2ft Column Height Extensions
 Footpad Accessories
 Part No.  Description
 B2280PR  NEW wide frame footpad
 10300  Pair of luxury car adapters
 10313  Pair of 6 in. stack adapter extensions
 10315  Stack adapter kit - includes (4) 3 in. Stack Extensions, (2) 6 in. Stack Extensions & (2) Organizer Racks with hardware
 10316  Organizer rack for stack adapter extensions
 B2260  Round rubber-style double screw foot pad assembly. For use on 10k 2-post lifts only, 2,500 lb capacity per footpad.
 Power Upgrades
 Part No.  Description
 3PH217  Power Unit Upgrade to 3-Phase - 208V
 3PH239  Power Unit Upgrade to 3-Phase - 230V
 3PH469  Power Unit Upgrade to 3-Phase - 460V


Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc.,

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.


Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No

Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.