Challenger Lifts CL20-2 20000 Lbs Heavy Duty Symmetric Two Post Lift (Extended Height)
Introducing our heavy-duty lifting solution, specifically engineered for vehicles weighing up to 20,000 lbs. Our lift is wider and taller, providing a robust and durable option for your fleet maintenance needs. The 2-Stage arms ensure stability during lifting, while the adjustable width makes it suitable for various vehicle sizes. The optional 2′ column extensions allow your shop to handle even taller vehicles.
This versatile lift is essential for any fleet maintenance operation. With adjustable columns and superior strength, this lift is your ultimate lifting solution for heavy-duty vehicles. ALI® Certified.
Features
- Engineered to be wider, taller, and stronger. Ready to tackle the heaviest vehicles in any fleet.
- Single-point air actuated lock release allows the technician to disengage both columns simultaneously.
- Oversized 5” diameter steel pulley and heavy-duty 3/8” cable reduces stress on equalization system and increases cable life.
- 60” lifting carriage design increases lift life.
- Adjustable width and symmetrical design allow easy access to the vehicle’s interior.
- Dual integrated rubber door guards to prevent door damage.
Specifications
Model Number | CL20-2 |
Description | 20K Extended Height |
Lifting Capacity | 20,000 lbs. |
Maximum Load Per Arm | 5,000 lbs. |
Lift Configuration | Symmetric |
Rise Time | 62s |
Rise Height (Maximum with Stack Adapters) | Min. 76.6" Max. 84.6" |
Screw Pad Height | Min. 6.2" Max. 7.6" |
Overall Height Options | 186", 192", 198" |
Overall Width Options | 166.75", 160.75", 154.75" |
Arm Configuration | 2-Stage Front/Rear |
Arm Reach | Min. 38.5" Max. 62" |
Between Columns | 120", 126", 132" |
Drive-Thru Clearance | 104.25", 110.25", 116.25" |
Floor to Overhead Switch | 179", 185", 191" |
Motor/Voltage | 3HP, 1Ph, 60Hz, 208/230v |
Air Supply Required | 90-120 psi |
Min. Ceiling Height Required | 15'8", 16'2", 16'8" |
Additional Parts and Accessories
Power Upgrades | |
Part No. | Description |
3PH217 | Power Unit Upgrade to 3-Phase - 208V |
3PH239 | Power Unit Upgrade to 3-Phase - 230V |
3PH469 | Power Unit Upgrade to 3-Phase - 460V |
Productivity Accessories | |
Part No. | Description |
10317 | Reducer bushing kit |
10333 | Sprinter adapter kit - includes (2) pin adapters and (2) cradle adapters for 15000-3S series only |
B10264A | Air/electric workstation with filter/lubricator/regulator |
B99700 | Tire Tool Manager Work Station with filter/lubricator/regulator |
Download
Other Models
Model Number | CL16-0-3S | CL16-2-3S | CL20-0 | CL20-2 |
Description | 16K Standard | 16K Extended Height | 20K Standard | 20K Extended Height |
Lifting Capacity* | 16,000 lbs. | 16,000 lbs. | 20,000 lbs. | 20,000 lbs. |
Maximum Load Per Arm | 4,000 lbs. | 4,000 lbs. | 5,000 lbs. | 5,000 lbs. |
Lift Configuration | Symmetric | Symmetric | Symmetric | Symmetric |
Rise Time** | 62s | 62s | 62s | 62s |
Rise Height (Maximum with Stack Adapters) | Min. 75.5" Max. 81.5" | Min. 75.5" Max. 81.5" | Min. 76.6" Max. 84.6" | Min. 76.6" Max. 84.6" |
Screw Pad Height | Min. 4.75" Max. 6.5" | Min. 4.75" Max. 6.5" | Min. 6.2" Max. 7.6" | Min. 6.2" Max. 7.6" |
Overall Height Options | 162", 168", 174" | 186", 192", 198" | 162", 168", 174" | 186", 192", 198" |
Overall Width Options | 166.75", 160.75", 154.75" | 166.75", 160.75", 154.75" | 166.75", 160.75", 154.75" | 166.75", 160.75", 154.75" |
Arm Configuration | 3-Stage Front/Rear | 3-Stage Front/Rear | 2-Stage Front/Rear | 2-Stage Front/Rear |
Arm Reach | Min. 36.625" Max. 75" | Min. 36.625" Max. 75" | Min. 38.5" Max. 62" | Min. 38.5" Max. 62" |
Between Columns | 120", 126", 132" | 120", 126", 132" | 120", 126", 132" | 120", 126", 132" |
Drive-Thru Clearance | 104.25", 110.25", 116.25" | 104.25", 110.25", 116.25" | 104.25", 110.25", 116.25" | 104.25", 110.25", 116.25" |
Floor to Overhead Switch | 155", 161", 167" | 179", 185", 191" | 155", 161", 167" | 179", 185", 191" |
Motor/Voltage*** | 3HP, 1Ph, 60Hz, 208/230v | 3HP, 1Ph, 60Hz, 208/230v | 3HP, 1Ph, 60Hz, 208/230v | 3HP, 1Ph, 60Hz, 208/230v |
Air Supply Required | 90-120 psi | 90-120 psi | 90-120 psi | 90-120 psi |
Min. Ceiling Height Required | 13'8", 14'2", 14'8" | 15'8", 16'2", 16'8" | 13'8", 14'2", 14'8" | 15'8", 16'2", 16'8" |
* Lift capacity ratings are based on loads equally distributed on all four arms.
** Lifting and lowering speeds may vary depending on the weight of the vehicle.
*** Optional 3 phase electrical also available.
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
Accessories | 90 days | No | |||
Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.