Bendpak XPR-9S-DC 22-lb Capacity. Die Cast Two-Post Lift (1/10 Scale MODEL)
*RC truck is not included.
XPR-9S-DC 22-lb. Capacity, 1/10 Scale Two-Post Lift, Die-Cast
How do you pack all the strength, ruggedness and badassery of a BendPak lift into a 1/10th scale model? RC4WD has done just that with the first-ever officially licensed BendPak XPR-9S two-post lift. Completes any scale garage and makes a great gift for the car fanatic in your life!
*Small in scale, but not in awesomeness
Your dream of bringing a full-sized BendPak car lift to your desktop, shop or shelf has finally arrived. Introducing the world’s first fully-functional BendPak XPR-9S two-post lift in 1/10 scale size. Sharing similar mechanics found in all BendPak two-post lifts, the inner-workings of this scale-model masterpiece are truly exceptional. It’s a must-have tool and collectible for any auto-enthusiast, scale-garage fanatic, diorama devotee or those looking to add the perfect workshop companion to their growing radio controlled (RC) cars and trucks collection. If you don’t have a scale garage now, you most likely will after getting your hands on one of these.
This small-scale XPR-9S-DC features built-in miniature DC motors that raise and lower the lift with the simple push of a button. Fully-adjustable telescoping lift arms ensure your scale model vehicles sit proudly atop of the lift ready to be admired by all. A NiMH rechargeable battery pack is also included to allow years of use and enjoyment.
No professional auto shop or home garage is complete without a BendPak lift towering over the work area. Bring your scale models, RC cars and garage scenes to a whole new level with this miniature-sized XPR-9S two-post lift, or dare we say, its little brother.
Features
- Components are made out of sturdy billet aluminum for superior quality.
- Steel screws in each column provide steady lifting and lowering.
- Fully-adjustable lift arms ensure the perfect fit of most scale vehicles.
- Ease-to-use ON/OFF switch and simple push buttons operate lift and decent.
- Painted in BendPak’s official Gunmetal Gray.
- Reach full height in 50 seconds or less.
- Supports at the base of the model prevents tipping.
- NiMH rechargeable battery eliminates bulking wiring.
- Official BendPak decals and warning labels included.
- Optional personalized gift message can be placed in package.
What's Included
- 1x RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift
- 1x NiMH Rechargeable Battery Pack
- 1x BendPak Decal Sheet
- 1x Warning Decal Sheet
- 1x Instruction Manual
- 1x Optional Gift Card Message
- Required Parts
- Charger (JST-PH 2.0 Battery Plug Connector) needed with an appropriate plug to charge the included NIMH battery pack
| Capacity | |
| Lifting Capacity* | 22 lbs. (10 kg) |
| *Max Capacity / Front Axle | 11 lbs. (5 kg) |
| *Max Capacity / Rear Axle | 11 lbs. (5 kg) |
| Rise | |
| A - Rise | 10.5" (267 mm) |
| B - Rise + Pad Only | 11.25" (286 mm) |
| D - Min. Height + Pad | 0.5" (13 mm) |
| Time to Full Rise | 50 seconds |
| Outside Dimensions | |
| E - Height Overall | 16.5" (419 mm) |
| F - Width Overall | 17" (432 mm) |
| G - Outside Columns | 15.75" (400 mm) |
| Inside Dimensions | |
| H - Inside Columns | 12.5" (318 mm) |
| I - Drive-Thru Clearance | 11" (279 mm) |
| Arms & Pads | |
| K - Front Arm Reach: (MIN) | 4" (102 mm) |
| K - Front Arm Reach: (MAX) | 5.5" (140 mm) |
| L - Rear Arm Reach: (MIN) | 3.5" (89 mm) |
| L - Rear Arm Reach: (MAX) | 5.75" (146 mm) |
| Max Load Per Arm | 5.5 lbs. (2.5 kg) |
| Floorplate | |
| L - Height | 1" (25 mm) |
| M - Width | 3" (76 mm) |
| Power Unit | |
| Motor | Two (2) DC Electric Motors |
| Battery | NiMH Rechargeable Battery Pack (1400 mAh / 7.2 V) |
| Noise | 45 dB |
| Shipping | |
| Weight | 9-lbs. (4 kg) |
| Dimensions | 18.75" x 8.5" x 4.5" (476 mm x 216 mm x 114 mm) |
*Specifications subject to change without notice
Downloads
