BendPak 6,000 Lb. Capacity, Easy-Roll Wheels Rolling Bridge Jack
Lift 6,000 lbs. for Full Wheel Service Capability
An individual jack is over-engineered and capable of holding the weight of an entire vehicle, so the two jacks you use to hoist your car are incredibly safe and may even have an overall lift capacity that’s over twice the weight of the vehicle itself. We do this so there’s never any question as to whether or not our four-post bridge jacks are safe. However, it is still important that you never overload a single jack unit past its listed lift capacity.
Features
- 6,000-lb. lifting capacity
- Easy-Roll Wheels
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
- Easy-Roll Wheels Come Standard
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Three lock levels
RJ6W Specifications | |
Lifting Capacity | 6,000 lbs. (2,721 kg) |
Suitable Lift Model(s) | XR-12000 Series |
Min. Drive-Over Height* | |
Pad Only: | 1.25" (32 mm) |
Pad + 2.75" Adapter: | 4" (102 mm) |
Pad + 5.5" Adapter: | 6.75" (171 mm) |
Max. Lifting Height* | |
Pad Only: | 12" (305 mm) |
Pad + 2.75" Adapter: | 14.75" (375 mm) |
Pad + 5.5" Adapter: | 17.5" (445 mm) |
Reach | |
Support Base Width: | 36.25" (921 mm) - 47.25" (1,200 mm) |
Max. Arm Reach: | 56" (1,422 mm) |
Min. Arm Reach: | 42" (1,067 mm) |
Time to Full Rise: | 55 seconds |
Pump: | Air/Hydraulic |
Air Pressure: | 125 PSI (10-25 CFM) |
Max. Operating Hydraulic Pressure: | 3,370 PSI |
Power Requirement: | None |
Shipping Weight: | 436 lbs. (193 kg) |
Shipping Dimensions: | 42" x 24" x 14" (1,066 mm x 609 mm x 355 mm) |
Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
Downloads
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.