Baileigh TN-400 abrasive notcher

Baileigh

SKU:
BA9-TN400
Condition:
New
Availability:
Factory Shipped
Shipping:
Calculated at Checkout
Total Price:
MSRP: $7,436.97
$6,119.00
(You save  $1,317.97 )
Adding to cart… The item has been added
Shipping Calculated at Checkout Factory Shipped

Baileigh TN-400 abrasive notcher

*Images for reference only.

The TN-400 abrasive tube notcher uses a self-centering vise to guarantee the right belt positioning every time. This machine will help you perfectly cope thin wall tubing.

Features

  • Made in the USA.
  • 3 hp motor runs on 220-volt single-phase power.
  • Ideal for coping the ends of .75” OD to 2” OD tubing or pipe.
  • Notches at almost any angle up to 60°.
  • 79” x 4” belt spins at a speed of 5420 feet per minute.
  • V-block design of the vise jaws keeps the tube or pipe centered with the notching spindle and holds it securely.
  • Vise carriage rides on a smooth Thompson® shaft assembly during the notching cycle.
  • Pivoted control lever presses the material press into the belt.
  • Quick-change tooling system allows you to swap out the mandrel in seconds.
  • Comes standard with 1.25” pipe mandrel.

Specifications

 Belt Speed (FPM)  5420
 Model Number  TN-400
 Motor (HP)  3 hp
 Notch Capacity (in./OD)  .75" - 2"
 Shipping Weight (Lbs.)  480
 Volts  220

*Specifications subject to change without notice.

Downloads

pdf.jpg Manual

 

prop65 warning

*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin

Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791