Baileigh SH-12014 sheet metal shear
Baileigh SH-12014 sheet metal shear
This 120” hydraulic shear lets you cut full sheets the long way. Built with a plate steel carriage, the rigid and simple SH-12014 will give you decades of dependable service.
- 14 gauge mild steel maximum capacity.
- Minimum capacity of 24 gauge mild steel.
- 5 hp motor runs on 220-volt 3-phase power.
- Powerful industrial-grade hydraulics produce smooth movements that prolong blade life.
- Up to 20 strokes per minute
- Adjustable 24” backgauge helps ensure repeatability.
- Front support arms and table guides keep the material square to the blade.
- 3 modes on the operator console:
- Inch mode: Jog the control and ease the blade down to the material.
- Single mode: Make one cut cycle per foot pedal push.
- Auto mode: Continue cycling as you hold the pedal down.
- Comes standard with high carbon chromium blades.
- Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money.
- Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
- Fully welded steel construction helps prevent flex and maintain accuracy for many years.
|Blade Rake Angle||2 degrees|
|Back Gauge Length||24"|
|Thickness (SS)||14 ga. (18 ga.)|
|Strokes Per Minute||20|
|Front Gauge Length||24"|
|Power||220V / 3-phase|
|Minimum Material Thickness||24ga|
|Shipping Dimensions (Inches)||150x44x60|
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
Frequently Bought Together
Total Price:Add to Cart
Please choose options for all selected products