Baileigh PL-2080 precision metal lathe


Factory Shipped

Total Price:
$59,584.29 $48,499.00
(You save $11,085.29)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Baileigh PL-2080 precision metal lathe

Everything about the PL-2080 industrial lathe is powerful, from its hardened slideways to the cast iron base. This engine lathe also includes a Mitutoyo® DRO.


  • 12 speeds from 20 to 1,500 rpm.
  • 15 hp motor runs on 220-volt 3-phase power.
  • Capable of making metric or standard threads.
  • Mitutoyo® 2-axis digital readout (DRO) system helps you obtain precise results.
  • Polished ways with integrated wipers move as smoothly as the day they were made for years.
  • Square indexing tool post.
  • Lathe body is made from the best iron castings to ensure a rigid and stable platform.
  • Cast pieces are fully integrated with the head stock, so every joint is tight.
  • No assembly required.
  • Comes standard with:
    • 3-jaw universal chuck (12”).
    • 10” back plate.
    • Micrometer saddle stop.
    • Steady rest and follow rest.
    • Longitudinal rapid traverse.
    • Headstock chuck guard with automatic safety switch.
    • Coolant system with rear splash guard.
    • Halogen work light.
    • Emergency foot brake.


 Item Number  PL-2080
 Speed  20 – 1550 rpm
 Spindle Bore  3.125"
 Spindle Nose  D1-8"
 Threads Diametrical Qty Speed  50 / 4–112 D.P.
 Threads Imperial Qty Speed  60 / 2–112 T.P.I.
 Threads Metric Qty Speed  60 / .2–14 mm pitch
 Threads Module Qty Speed  50 / .2-7 M.P.
 Spindle Taper Sleeve  Morse #5
 Spindle Taper Nose  Morse #7
 Tailstock Quill Dia  2.9375"
 Tailstock Quill Taper  Morse #5
 Tailstock Quill Travel  6.3125"
 Compound Rest Travel  10"
 Center Length  80.313"
 Center Height  10"
 Bed Width  16.125"
 Longitudinal Feeds Metric Qty Speed  50 / .037 – .983 mm / rev.
 Main Motor  15 hp
 Longitudinal Feeds Imperial Qty Speed  50 / .0014" – .0387" / rev.
 Lead Screw Diameter  1.5"
 Lead Screw Thread Pitch  4 T.P.I.
 Max. Swing In Gap Length  7.0625"
 Max. Swing Over Bed  20"
 Max. Swing Over Cross Slide  13"
 Max. Swing In Gap Dia  26.375"
 Cross Feeds Imperial Qty Speed  50 / .0007" – .01935" / rev.
 Cross Feeds Metric Qty Speed  50 / .0185 – .52 mm / rev.
 Cross Slide Travel  12.5"
 Power  220V / 3-phase
 Shipping Weight  6050lbs
 Shipping Dimensions (Inches)  141x53x66

*Specifications subject to change without notice.

WARNING CA Proposition 65 Message


Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791

Frequently Bought Together

Please choose options for all selected products

  • Choose Options