Baileigh PL-1860 engine lathe


Factory Shipped

Total Price:
$38,967.14 $32,099.00
(You save $6,868.14)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Baileigh PL-1860 engine lathe

With a base constructed from 100% cast iron, this precision engine lathe for sale holds exacting tolerances under the most demanding work conditions. It includes a factory-installed Mitutoyo® DRO.


  • 12 speeds between 80 and 2,000 rpm.
  • Powerful 7.5 hp motor lets you shave heavy cuts off your parts for better surfaces, faster production, and longer tooling life.
  • Mitutoyo® 2-axis digital readout system makes it simple to achieve high-quality, precise results.
  • This cast iron lathe is capable of making metric or standard threads.
  • Precision-ground and hardened slideways move smoothly and consistently.
  • Turcite-B® coating on the ways offers years of protection under the most grueling turning conditions.
  • Gap lathe design enables you to fit a larger diameter by removing a slide section.
  • Cast iron construction keeps the lathe rigid and accurate over many years of use.
  • Comes standard with:
    • 3-jaw universal chuck (8”).
    • Headstock chuck guard with automatic safety switch.
    • 8” back plate.
    • Steady rest and follow rest.
    • Micrometer saddle stop.
    • Integrated coolant system with a rear splash guard.
    • Halogen work light.
    • Emergency foot brake.


 Item Number  PL-1860
 Speed  30 – 2000 rpm
 Spindle Bore  2.375"
 Threads Diametrical Qty Speed  32 / 4–32 D.P.
 Threads Imperial Qty Speed  40 / 2–56 T.P.I.
 Threads Metric Qty Speed  53 / .4–14 mm pitch
 Threads Module Qty Speed  44 / .4–7 M.P.
 Spindle Taper Sleeve  Morse #4
 Spindle Taper Nose  Morse #6
 Tailstock Quill Dia  2.125"
 Tailstock Quill Taper  Morse #4
 Tailstock Quill Travel  4.75"
 Compound Rest Width  4.92"
 Center Length  60"
 Center Height  9"
 Compound Travel  5.31"
 Bed Height  12.20"
 Bed Length  17157
 Bed Width  11.81"
 Longitudinal Feeds Metric Qty Speed  40 / .032 – .640 mm / rev.
 Main Motor  7.5 hp
 Longitudinal Feeds Imperial Qty Speed  40 / .0012" – .0252" / rev.
 Lead Screw Diameter  1.25"
 Lead Screw Thread Pitch  4 T.P.I.
 Max. Swing In Gap Length  6.125"
 Max. Swing Over Bed  18"
 Max. Swing Over Cross Slide  11.3125"
 Max. Swing In Gap Dia  25.196"
 Cross Feeds Imperial Qty Speed  40 / .0006" – .0126" / rev.
 Cross Feeds Metric Qty Speed  40 / .015 – .320 mm / rev.
 Cross Slide Travel  9"
 Cross Slide Width  7.08"
 Cutting Tool Max Section  .625" x .625"
 Feed Rod  .708 dia.
 Power  220V / 3-phase
 Shipping Weight  5060lbs
 Shipping Dimensions (Inches)  111x44x88

*Specifications subject to change without notice.

WARNING CA Proposition 65 Message


Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791

Frequently Bought Together

Please choose options for all selected products

  • Choose Options