null

Baileigh DP-1500VS variable speed drill press

Brand:
Baileigh
SKU:
BA9-1002923
Condition:
New

Factory Shipped

Total Price:
$8,435.71 $6,959.00
(You save $1,476.71)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Baileigh DP-1500VS variable speed drill press

Drill smarter and harder with this 20” floor-type drill press which tackles hefty capacities at up to 2000 rpm. Built to deliver precise results for years, the DP-1500VS comes equipped with a variety of time-saving and performance-enhancing features.

Features:

  • 2 hp motor runs on 220-volt single-phase power and will work practically anywhere.
  • Handles a maximum drilling capacity of 1.5” steel and 1.75” cast iron.
  • Auto-reversing tapping feature has a capacity of .937”.
  • Speed range from 65 to 2000 rpm lets you pick the right setting for your project.
  • Potentiometer dial controls the drill speed.
  • Digital readout on the front displays the speed in rpm for easy checking.
  • Sophisticated Delta® inverter drives #4 Morse taper spindle.
  • Chuck with automatic tool ejector simplifies tooling changes.
  • Large, machined 22” x 18.5” drill table offers plenty of room for material.
  • Oversized .625” T-slots allow for secure clamping of a vise or fixture.
  • Sturdy 4.52” column eliminates flex and boosts drilling accuracy.
  • Cast base supports rigidity at maximum capacity.
  • Power-down feed helps to prolong the machine’s lifetime of use.
  • Safety guard around the spindle with a limit switch protects you and your shop.
  • Powerful coolant system, housed in the base, keeps the drill from overheating and helps the drill last longer.
  • Includes a bright halogen light that bends to enable you to see the material better as you work.

Why choose the DP-1500VS over similar drill presses?

  • You can extend tooling usage by adjusting the inverter-driven head and quill speed to each different drill size.
  • Continuous speed range, instead of just a few pre-set speeds, allows you to fine-tune the setting as you work.
  • We use only the best-quality heavy metal castings for the base and table to add to the overall strength of the drill press.
  • The DP-1500VS comes standard with features that other brands consider upgrades, like coolant systems and worklights.

Specifications:

 Item Number  DP-1500VS
 Table Size  22" x 18.5"
 Quill Diameter  2.95"
 Quill Feed  .0078", .004", .002" per rev.
 Spindle Nose to Table  22.75"
 Spindle Nose to Base  40.75"
 Spindle Speed High  245 – 2000 rpm
 Spindle Speed Low  65 – 540 rpm
 Spindle Taper  MT 4
 Table Slot  .625"
 Tapping Capacity  .937"
 Main Motor  2 hp
 Drill Capacity Cast Iron  1.75"
 Drill Capacity Steel  1.5"
 Power  220V Single Phase
 Shipping Weight  990lbs
 Spindle Travel  5.9"
 Column Diameter  4.52"
 Base Dimensions L x W  27" x 19"
 Shipping Dimensions (Inches)  60x44x88

*Specifications subject to change without notice.

WARNING CA Proposition 65 Message:

image.png

Download

DP-1500VS Manual

Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791

Frequently Bought Together

Please choose options for all selected products

  • Choose Options