null

Baileigh TS-1248P-36 5 hp 220V Single Phase, 12" Professional Cabinet Style Table Saw, 48" x 30" Table, 36" Max Rip Cut

Brand:
Baileigh
SKU:
1008082
Condition:
New

Factory Shipped

Total Price:
$5,617.03 $4,572.00
(You save $1,045.03)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Baileigh TS-1248P-36 5 hp 220V Single Phase, 12" Professional Cabinet Style Table Saw, 48" x 30" Table, 36" Max Rip Cut

DESCRIPTION

This 680-pound industrial table saw can cut thousands of board feet per day and make angles that fit perfectly. The steel basemassive trunnion and cast iron table maintain accuracy.

  • 36” right-side rip capacity.
  • Also available with a 52” rip capacity.)
  • 5 hp Leeson motor turns at 3,600 rpm.
  • Accepts standard 12” blades with a 1” arbor that can tilt 45°to the left.
  • Runs on 220-volt single-phase power, so it’ll work almost anywhere.
  • 48” x 30” work table with 36” extensions.
  • Both the table and its extensions are made from precision-ground cast iron.
  • Table surface will stay square because of webbed or criss-cross design on the bottom that meshes into the base.
  • The tabletop won’t warp in spite of heat and moisture.
  • Smoothly finished table allows wood to slide without resistance. There’s no unevenness to compromise the accuracy of your cut.
  • You can polish the cast-iron table up and restore the original shine even after years of hard use.
  • Rip fence made of heavy UMHW plastic that you can cheaply replace if you cut into it.
  • Rip fence incorporates a digital readout (DRO) for rip capacity.
  • Just “zero” the DRO at the blade to get a perfect, repeatable length every time.
  • Steel handwheels, for adjusting blade height and miter angle, are located on the base.
  • Rack and pinion mechanism makes it easy to move the blade up and down.
  • Comes with a simple miter gauge on the tabletop and DRO for the bevel angle on the base to help with repeatability.
  • Massive steel trunnion is attached to the base, so the machine won’t wobble or exceed safe noise levels.
  • Rigid all-steel base maintains accurate alignment and keeps vibrations down to a minimum.
  • Dust shroud inside the machine collects sawdust from under the blade and funnels it to the 4” port. Just hook up an extraction system.
  • CSA-approved.
  • 4-piece safety blade guard with anti-kickback reverse teeth.
  • Riving knives for both dado and regular cut-through will help spread the wood and prevent pinching or twisting.
  • The saw and its replacement parts are typically in stock for fast deliveries.
  • Covered by a 1-year parts warranty.
  • Our team of reps (all with hands-on machine experience) will provide lifetime technical support by phone.

Specifications

  • Item Number TS-1248P-36
  • Table Size (Length) 24.4"
  • Table Size (Width) 30.7"
  • Table Saw Working Table 48.4" x 30.7"
  • Table Saw Blade Diameter 12"
  • Table Saw RPM 3600
  • Table Saw Arbor 1"
  • Table Saw Cutting Height @ 90° 4"
  • Table Saw Cutting Height @ 45° 2-3/4"
  • Maximum Dado Diameter 8"
  • Maximum Dado Width 13/16"
  • Maximum Rip Cut (Right) 36"
  • Power 220V Single Phase
  • Horse Power 5
  • Weight (lbs) 680

Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791

Frequently Bought Together

Please choose options for all selected products

  • Choose Options