Baileigh STS-16120-CNC 220V 3 Phase 7.5 hp 16" CNC Sliding Table Saw
*Images for reference only.
This CNC table saw lets you store cut programs to ensure accuracy on high-volume, 3-shift schedules. With the sliding table, you need only one operator to cut 10-foot panels. Order this sliding table saw for sale today.
CNC System:
- 5.7” touchscreen control panel has a 300 program memory capacity.
- You can program the cutting width, blade tilt, and blade height of the main saw, as well as the scoring blade height.
- Save cut settings for a given application or schedule (for example, “Monday Cuts”), so they’re the same each time.
- Simply choose your desired cut program, and the system will take the table to the right settings. Then, manually push the wood towards the blade.
This CNC sliding table saw is also available in 2 non-CNC versions: STS-14120-DRO (with a digital readout) and STS-14120 (without one).
Features
- Includes safety blade guards for straight or angled cuts that you can switch in seconds.
- Includes fences for ripping, crosscut, and angled cuts.
- Servo motor moves the rip fence into place as programmed. No need to read scales. Just dial it in.
- 2-position rip fence can lift out of the way for crosscutting.
- Cast iron frame backs the rip fence, keeping it parallel to the saw.
- Crosscut fence offers 2 DROs (one for the main gantry fence and one for the extension) for repeatability.
- Angle fence is scaled for precision.
- Heavy cast steel trunnion has boxed (not dovetailed) ways for extra rigidity.
- Enormous 15” x 125” sliding table is made of anodized, fully-extruded aluminum, so it’ll stay true and square.
- Table slides on 4 precision shafts made of polished steel for the smoothest slide possible.
- Fully welded base made of 12-gauge steel reduces vibrations, maintains alignment, and keeps cuts accurate.
- Wiper system in the shafts eliminates build-up from sawdust and grease.
- You can slide a whole sheet of 4’ x 8’ material so easily you’d never think there’s weight on it.
- Load lock prevents the table from budging when you’re setting down large sheets of wood.
- 4” main dust port that you can hook up to an extraction system and keep your shop clean.
- 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm
- Set the RPM by manually moving the belts to different gears
- Digital readout (DRO) shows the blade speed to help with repeatability
- Comes standard with a 12” blade but accepts up to a huge 16” blade
- Table wood saw turns on a 1” arbor
- Runs on 220-volt 3-phase power
- 1 hp scoring blade spins at 8,000 rpm to ensure a crisp, clean cut. No need to spend extra time on sanding afterwards
Specifications
| Blade Size (In.) | 16" Max diameter(** When using a 16" blade, the saw blade will be 1" higher than table when in the lowest position) |
| Maximum Board Width (In.) | 51" |
| Model Number | STS-16120-CNC |
| Product Lease Price | 988 |
| Scoring Blade Arbor Size (In.) | 7/8" |
| Scoring Blade Size (In.) | 4.5" |
| Scoring Blade Speed (RPM) | 8000 |
| Shipping Dimensions (L x W x H) (In.) | 91x53x42, 80x16x17, 131x20x17 |
| Table Width (In.) | 15" |
| Weight (Lbs.) | 2810 |
| Table Saw Cutting Height (In.) | 3.25" with a 16" blade |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
