Baileigh DP-2012F-HD-V2 110V 20" Floor Drill Press 12 Spindle Speeds, 16.5"x18.5" Table MT4 (Requires Dedicated 20A Circuit)
*Images for reference only.
If you need more capacity from your Drill Press, look at the DP-2012F-HD-V2 Floor Standing Drill Press to see if it will fit your needs. This mammoth has a 20” swing and a cast iron 16.5"x 18.5" oversized table and can handle just about anything that you can throw at it. The 3.6” diameter column and 24” x 16.5” cast iron base make for one rigid structure.
Features
- 110V floor drill press
- 20" swing
- 12 spindle speeds
- 16.5" x 18.5" table
- Runs on 110 volts
- Turn the MT4 spindle to 3200 RPMs
- The range of speeds is done through the use of six pulleys
- Pulleys give 12 spindle speeds
- It also includes a drill chuck that can opens to a maximum of ¾”
Specifications
| Accessories | Included Accessories |
| Distance Base to Spindle | 46.75 (Min.) (In.) |
| Drilling Capacity | 1.25 (In.) |
| Model Number | DP-2012F-HD-V2 |
| Number of Spindle Speeds | 12 - 220 to 3200 rpm |
| Shipping Dimensions | 69x44x23 (L x W x H) (In.) |
| Spindle Distance to Table | 26" (Max.) (In.) |
| Table T-Slot | 3 @ 5/8" (In.) |
| Table Width | 18.5" (In.) |
| Weight | 390 (Lbs.) |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
