AirCat 1355-XL 3/8" Composite NITROCAT Impact Wrench 700 ft-lbs
Usually Ships out within 1 to 3 business days
Usually Ships out within 1 to 3 business days
AirCat 1355XL NitroCat 3/8" Xtreme Torque Impact Wrench Twin Hammer
The NITROCAT 1355-XL is a no non-sense, hard hitting 3/8" impact wrench that incorporates the Twin Hammer mechanism. With an industry leading 700 (ft-lbs) of Loosening Torque and 1,750 Blows Per Minute, the 1355-XL will give you all the torque you need and tremendous speed to get the job done.
The TWIN HAMMER Mechanism consists of 2 hammers in a closed cage which rotates around the anvil. This design allows the hammer to hit at the same time on both sides of the anvil. A twin hammer design is very durable and particularly suitable for long operating cycles. A further advantage is that the design consists of few individual parts and this makes it very easy to service. The twin hammer is lubricated by grease. Lubrication can be easily done from outside via greasing fitting without opening the housing. The TWIN-Hammer design is best used for industrial, all-around automotive applications, tire service and assembly.
All the Power, Half the Noise! The AIRCAT tool line has a substantially reduced level of noise while retaining more power and torque. Our tools have been tested & shown to operate at 82-86 dBa (decibels), far below the OSHA guidelines. This feature benefits not only the mechanic but also the overall business. The patented tuned exhaust muffler technology, in all the tools, allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. AIRCAT has innovated through-the-handle exhaust design, which incorporates its revolutionary worldwide patented internal muffler/filter. The benefits include reduced hazards from breathing exhausted air particulates, the elimination of blow-by into the operators eyes and lungs as well as reduce noise. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operators hands, wrists and arms. The patented AIRCAT handle offers better overall distribution of weight for a balanced tool and provides a unique grip that makes it easier to use for prolonged periods of time. Call one of our nationwide distributors today to hear and feel the AIRCAT difference!\
- Provides 500 ft-lb maximum torque and 700 ft-lb of loosening torque
- The NitroCat 1355-XL is a no non-sense, hard hitting 3/8" impact wrench that incorporates a twin hammer mechanism
- Provides all the torque you need and tremendous speed to get the job done
- Patented quiet tuned exhaust (86 dBA)
- Patented easy operation flip lever forward and reverse
- Durable Kevlar reinforced "Body Armour" housing
- Great for brake calipers and transmission work
|Square Drive (in.)||3/8|
|Air Cons. (CFM)||6|
|Bolt Capacity (in.)||1/2|
|Air Inlet (in.) NPT/BSP||1/4|
|Rec. Hose Size (in.)||3/8|
|Free Speed (RPM)||10,000|
|Impacts Per Minute (IPM)||1,350|
|Max. Torque (ft-lb)||500|
AIRCAT and NITROCAT air tools are warranted to be free from defects in material and workmanship for 2 years from date of purchase. We will repair or replace; at our option any defective part or unit which proves to be defective in material or workmanship during this 2 year period. The foregoing obligation is AIRCAT and Florida Pneumatic's sole liability under this or any implied warranty, under no circumstances shall it be liable for any incidental or consequential damages.
This warranty applies to the tool only. The warranty does not apply to any attached accessories/consumable products; such as drill chucks, sander backing pads, air hammer retainers and chisels or “kit” accessories or any other accessory included with the tool.
Any repair due to normal wear and tear, abuse, misuse, modification of the tool or repair attempts (by other than an AIRCAT or Florida Pneumatic Authorized Service Center) are not covered by this warranty.
Return your tool to an AIRCAT or Florida Pneumatic Authorized Service Center freight prepaid. Be sure to include your name, address, copy of purchase with date and description of the suspected defect.
AIRCAT whose policy is continued product improvement reserves the right to make changes in design or construction at any time without incurring any obligation on tools previously sold.
Tune-Up and Head Kits for all AIRCAT PNEUMATIC impact wrenches and ratchets are available. For Authorized Service Centers, please visit www.aircat.com
Frequently Bought Together
Total Price:Add to Cart
Please choose options for all selected products