iDEAL PSB-SDD26B Side Down Draft Paint Booth
iDEAL’s PSB-SDD26-ASY-AK Side Down Draft Paint Booth is our highest quality pressurized paint booth. The Side Down Draft design pulls filtered air through ceiling of the booth and exhausts filtered air through bottom of the side walls of the booth. All of the panels receive a durable powder coat finish. Panels are constructed using 18 gauge flanged panels assembled using high quality 5/16″ hardware for a high quality, durable booth. Heavy duty hinges are used for all entry doors and have horizontal and vertical adjustment integrated into the design for easy installation. Our hip roof design utilizes vertical and horizontal lighting for effective, shadow free lighting to allow the painter to move around the booth with no light interference. The Side Down Draft Paint Booth is a pressurized booth that can be used for automotive refinishing, industrial finishing and furniture finishing.
Features
- Ideal, Side Down Draft Paint Spray Booth
- Typically Ships Within 48 Hours!
- Heavy Duty Precision Punched 18 Gauge Panel Construction
- Optimal Air Flow W/ Cfm 14,000 @.5 Static Pressure
- Commercial Grade 'Hip Panel' Design For Optimal Lighting Coverage
- Inside Dimensions: 26' L X 14' W X 9' 3" Η
- Convenient 5/16" Bolt & Nut Assembly
- Deluxe Control Panel Included
- White Powder Coat Panel Finish - (Inside & Outside)
- Manometer, Solenoid Valve, Hardware & Sealant Included
- (2Ea) Ul Listed Dayton 24" Tube-Axial Exhaust Fan W/ Spark Resistant Fan Blades
- Nema Rated 3Hp-3 Phase 230/460Vac-60Hz Motors Standard
- Premium Afc Intake & Exhaust Filters
- (10Ea) Ldpi Industrial Lighting T-8 'Vertical' Light Fixtures, 4 Lamp
- (40Ea) Ge T8 Florescent Lamps - 32W, 5000K 4' Length
- Tri-Fold Entry Doors W/ Viewing Windows & Shutoff Switch
- Personnel Door W/ Viewing Window & Shutoff Switch
- Meets Nfpa 33 Standards
- Optional: 1Ph Electrical, Plenum Kit, Tri-Fold Drive-Thru & Personnel Door Kits & Booth Extension Kit
Specifications
Inside Dimensions | 26’L X 14’W X 9′-3″H |
Outside Dimensions | 26′-4″L X 17′-8″W X 9-5″H |
Fan / Motor | (2ea) – 24″ Tube Axial Fans 2HP-3PH-230/460VAC-60HZ Non-Spark, NEMA Rated |
CFM | 14,000 @ .5 Static Pressure |
Lighting | 10 Each T-8 / 4 Bulb Light Fixtures |
Options | 1 Phase Electrical Configuration 8′ Exhaust Duct Kits (25″ Diameter) Led Lighting Upgrade Kit |
Recommended Options (Sold Separately)
- Personnel Side Door Kit
- 48″ Extension Kit
- Gas Fired Heater
- Canopy Plenum Kit
- 8′ Exhaust Duct Kit (2 Required)
Downloads
TUXEDO DISTRIBUTORS LIMITED WARRANTY
Structural Warranty:
The following parts and structural components carry a five year warranty:
Columns, Arms, Uprights, Swivel Pins
Legs, Carriages, Overhead Beam
Tracks, Cross Rails, Top Rail Beam
Limited One-Year Warranty:
Tuxedo Distributors, LLC (Tuxedo) offers a limited one-year warranty to the original purchaser of Lifts and Wheel Service equipment in the United States and Canada. Tuxedo will replace, without charge, any part found defective in materials orworkmanship under normal use, for a period of one year after purchase. The purchaser is responsible for all shipping charges. This warranty does not apply to equipment that has been improperly installed or altered or that has not beenoperated or maintained according to specifications.
Other Limitations:
This warranty does not cover:
1. Parts needed for normal maintenance
2. Wear parts, including but not limited to cables, slider blocks, chains, rubber pads and pulleys
3. Replacement of lift and tire changer cylinders after the first 30 days. A seal kit and installation instructions will be sent for repairs thereafter.
4. On-site labor
Upon receipt, the customer must visually inspect the equipment for any potential freight damage before signing clear on the shipping receipt. Freight damage is not considered a warranty issue and therefore must be noted for any potential recovery with the shipping company.
The customer is required to notify Tuxedo of any missing parts within 72 hours. Timely notification must be received to becovered under warranty.
Tuxedo will replace any defective part under warranty at no charge as soon as such parts become available from the manufacturer. No guarantee is given as to the immediate availability of replacement parts.
Tuxedo reserves the right to make improvements and/or design changes to its lifts without any obligation to previously sold, assembled or fabricated equipment.
There is no other express warranty on the Tuxedo lifts and this warranty is exclusive of and in lieu of all other warranties,expressed or implied, including all warranties of merchantability and fitness for a particular purpose.
To the fullest extent allowed by law, Tuxedo shall not be liable for loss of use, cost of cover, lost profits, inconvenience,lost time, commercial loss or other incidental or consequential damages.
This Limited Warranty is granted to the original purchaser only and is not transferable or assignable.
Some states do not allow exclusion or limitation of consequential damages or how long an implied warranty lasts, so the above limitations and exclusions may not apply. This warranty gives you specific legal rights and you may have other rights, which may vary from state to state.