Ranger RP-50FC 25-Ton Capacity Electro/Hydraulic Heavy Duty Oil-Filter Crusher With Stand

Ranger

SKU:
RG-5150401
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Total Price:
MSRP: $5,634.00
$4,695.00
(You save  $939.00 )
Adding to cart… The item has been added

shipping-buttonjmc.png

Ranger Electro/Hydraulic Oil-Filter Crusher With Stand / 25-Ton Capacity / Heavy-Duty / 208-240V, 1-Phase, 50/60hz

RP-50FC Electric/Hydraulic Oil-Filter Crusher With Stand / 25-Ton Capacity / Heavy-Duty / 208-240V / 1 Ph / 50/60 Hz (5150401)

The super-sized RP-50FC industrial oil filter crusher applies 25 tons of electric-hydraulic pressing power to flatten just about any used oil filter to 20% of its original size, all while removing 95% of the residual oil. Filters up to 15.25" long and 6" diameter are crushed in seconds flat.

Harnessing a Tremendous 50,000 lbs. of Crushing Power
The super-sized RP-50FC industrial oil filter crusher applies 25 tons of electric-hydraulic pressing power to flatten just about any used oil filter to 20% of its original size, all while removing 95% of the residual oil. Filters up to 15.25" long and 6" diameter are crushed in seconds flat.

Our Most Powerful Oil Filter Crusher Yet
The controls on the RP-50FC are made from state-of-art materials and are ergonomically placed to keep you balanced, comfortable and in good posture while you crush. We’ve made it as easy as possible to operate this machine. A convenient automatic cycle feature lets you load the used oil filter in the crushing chamber, push a button, and walk away. Simply press the green button for fully automatic press cycle, the blue for initiating automatic return sequence and red for stop. It's that simple.

For your convenience, we’ve also included a remote electric foot switch, giving you even more versatility in how you control basic press operations. To top it all off, the RP-50FC oil filter crusher comes standard with a built-in automatic safety door with reinforced transparent viewing window, which stops everything if and when the door opens, so you get to work—and watch—safe and worry-free.

It’s time to say NO to permits and fees associated with “hazardous” oil waste. Get the government out of your life and make more money with the RP-50FC oil filter crusher.

*Note: For international buyers, a 380-415 VAC / 3 Ph / 50 Hz option is available. Just ask us about model RP-50FC-E.

Features

  • Maximum crushing pressure of 50,000 lbs.
  • Filters are reduced to 20% of their original size with 95% of residual oil removed.
  • Automatic cycle feature lets you load the filter, push a button, and walk away.
  • Fulfills EPA and other mandated environmental standards
  • Save on waste disposal costs and storage space
  • Handles automotive and heavy-duty filters up to 15-1/4" long and 6" diameter.
  • Cycle time approximately 8 to 15 seconds depending on filter size.
  • No-mess design operates clean and efficiently to lessen spill hazards.
  • Ergonomic controls feature automatic or manual cycles.
  • Welded steel plate construction
  • Electric-hydraulic power unit features 2-HP motor.
  • Automatic safety door stops operation when opened.
  • Transparent door for a convenient view of the crushing process.
  • Powered by a 2-HP electric-hydraulic pump with 2-gallon reservoir.
  • Rugged floor stand is designed to accommodate up to 55-gallon drums for efficient fluid handling.

Specifications

 Overall Height  90.5" (2,299 mm)
 Overall Width  32.5" (826 mm)
 Overall Depth  31.5" (800 mm)
 Chamber Opening Height  16" (406 mm)
 Chamber Opening Width  9.8" (249 mm)
 Chamber Opening Depth  11.5" (292 mm)
 Average Cycle Time  8 – 15 sec
 Power Supply  208-230VAC / 50/60 Hz / 1 Ph
 Shipping Weight  718 lbs. (326 kg)
 Shipping Dimensions  75" x 35" x 20" (1,905 mm x 889 mm x 508 mm)

 


 

 

***It is the buyer's responsibility to unload the freight at their location.

SHOP EQUIPMENT WARRANTY

SHOP EQUIPMENT WARRANTY

THE BEST WARRANTY IN THE BUSINESS - YOU HAVE OUR WORD 

Duration: From the date of purchase by the original Purchaser or 12 months from the date of shipment or whichever comes first.

  •  One Year (12-Months) Warranty on equipment structure*
  •  One Year (12-Months) Warranty on operating components
  •  One Year (12-Months) Free-Shipping** on ground?freight charges related to warranty performance 

Limited Warranty:

1. Who gives this warranty (Warrantor): BendPak/Ranger, 1645 Lemonwood Dr., Santa Paula, CA 93060

2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)

3. What products are covered by this warranty: Any Ranger brand Transmission Jack, Floor Jack, Motorcycle Lift Platform, Specialty Jack, Shop

Crane, Cart/Dolly, Jack Stand, Hydraulic Press, Hose Reel, Shop Equipment***

4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.

5. What is not covered under this warranty:

a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied

b. Any damage caused by using equipment beyond rated capacity and/or capability

c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.

d. Items considered general wear parts such as rubber or plastic pads/protectors, worn casters/wheels, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship

e. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings

f. Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants

g. Rusted components due to improper maintenance or corrosive environments

h. Cosmetic defects that do not interfere with product functionality

i.  Damage due to incorrect voltage or improper wiring

j.  Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Ranger product

k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications

6. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.

7. Responsibilities of Purchaser under this warranty:

a. Provide dated proof of purchase and maintenance records

b. In some cases, components may be required to be shipped to the nearest BendPak/Ranger Authorized Service Center. Freight costs, after 12?months, must be borne by the Purchaser.

c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).

8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts. 

*Equipment structure is defined as any non?moving permanently affixed frame or main body, or sub?structures that are non?moving and permanently affixed or attached to any main equipment structure or frame. **Free?shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. ***For all Ranger brand Transmission Jack, Floor Jack, Motorcycle Lift Platform, Specialty Jack, Shop Crane, Cart/Dolly, Jack Stand, Hydraulic Press, Hose Reel, Shop Equipment, Work Bench manufactured on or following 11/1/2011. 

Limitation of Liability:

BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damagesBendPak/Rangerproductsareprovidedandsoldasiswithoutanyexpressorimpliedwarrantiesincludingwarrantiesof merchantabilityorfitnessforparticularpurpose.No warranties, expressed or im

 

Videos Hide Videos Show Videos