Auto Twirler At-Db-Medium Medium Door Bars (2): Adj 35" To 53"
*The Medium Door Bars (2): Adj 35" to 53" ships bare steel. Powder Coating is available in red or blue for an additional cost.
We recommend that you support the door openings while on a rotisserie by using our adjustable Door Bars. These are absolutely critical for convertibles and when you’re doing rocker repair, but also a good idea for all bodies. They have left and right hand threads on them. Universal mounting plates and a universal joint are on both ends.
Adjust them out, bolt them on, and then adjust the center pipe like a big turnbuckle to maintain the opening dimensions for your door. We recommend bolting on the hinge and the striker, but it can also be bolted to the inner panels or other structural member. When you get done, take the car off the rotisserie, unbolt the door bars and you’re good to go. No clean up.
They come in 3 sizes depending on your vehicle (*Sold Separately):
AT-DB-LONG (Long Door Bars) | Long Door Bars adjust from 44” to 62”. Recommended for most unibodies. |
AT-DB-MEDIUM (Medium Door Bars) | Medium Door Bars adjust form 35” to 53”. Preferred for 55-57 Chevys. |
AT-DB-SHORT (Short Door Bars) | Short Door Bars adjust form 26” to 44”. Good for 55-57 Thunderbirds and imports. |
Downloads
1 year Limited Warranty
Every AutoTwirler has a 1 year warranty on the jacks and casters and a 1 year warranty on steel components against manufacturing defects from the date of purchase.
Mis-use
This warranty does not cover mis-use, not following instructions, or items that have been altered in any way.Replacement items are available, at a cost, if needed.
Non Transferable
This warranty is not transferable and must have proof of purchase.
Registering Product
If you purchased your unit thru a JMC Equipment, we highly recommend that you register your product with Auto Twirler by mailing, emailing, or faxing your receipt with your name, address phone and date of purchase.