Bendpak RBJ15000 15,000 Lbs Rolling Bridge Jack


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping
Total Price:
MSRP: $5,754.00
(You save  $959.00 )
Adding to cart… The item has been added

Bendpak RBJ15000 15,000 Lbs Rolling Bridge Jack

The RBJ15000 bridge jack from BendPak is capable of lifting up to 15,000 lbs. The HDS-35 four-post lift is a rugged machine that is meant for professional shops that often deal with massive, specialty equipment. If you have a truck lift, you will have easy access to the undercarriage but can’t get to the wheels. However, if you have a rolling bridge jack, you gain the opportunity to perform new services such as wheel balancing, wheel alignment, and tire changing.

Check out the RBJ15000 if you need to perform wheel service on heavy-duty vehicles.


  • 15,000-lb. lifting capacity.
  • Steel lifting pads standard.
  • High-pressure hydraulic power unit.
  • Optional air-line kit.


 RBJ15000 Specifications 
 Lifting Capacity  15,000 lbs. (6,804 kg)
 Suitable Lift Model(s)  HDS-27 Series, HDS-40 Series
 Min. Drive-Over Height* 
 Short Arm Pad  9" (229 mm)
 Short Top Pad  10" (254 mm)
 Tall Arm Pad  11" (279 mm)
 Tall Top Pad  12" (305 mm)
 Max. Lifting Height*  
 Short Arm Pad  19" (483 mm)
 Short Top Pad  20" (508 mm)
 Tall Arm Pad  21" (533 mm)
 Tall Top Pad  22" (559 mm)
 Support Base Width  45.75" (1,162 mm) - 59" (1,499 mm)
 Max. Arm Pad Reach  63.75" (1,619 mm)
 Min. Arm Pad Reach  48.5" (1,232 mm)
 Max. Top Pad Reach  39.5" (1,003 mm)
 Min. Top Pad Reach  7.75" (197 mm)
 Time to Full Rise  55 seconds
 Pump  Air/Hydraulic
 Air Pressure  125 PSI (10-25 CFM)
 Max. Operating Hydraulic Pressure  6,000 PSI
 Power Requirement  None
 Shipping Weight  708 lbs. (321 kg)
 Shipping Dimensions  48" x 29" x 18" (1,238 mm x 736 mm x 457 mm)


* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.


pdf.jpg  Manual


**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.