Bendpak 4-Post Lift Package Deal with 3D Aligner
This package deal includes: Package Deal: (1) HDSO-14AX + (1) 3DP4100R + (2) RJ7W
HDSO14AX 14,000-lb. Capacity / Open-Front Alignment Lift / Extended / Includes Turnplates and Slip Plates
HDSO14AX 14,000-lb. Capacity / Open-Front Alignment Lift / Extended / Includes Turnplates and Slip Plates (5175153)
Open-Front Design and 14,000 Lbs. of Might
The HDSO14AX is a 14,000-lb. capacity open-front alignment lift. The “open” design makes it easier to access the front turn plates and undercarriage. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. This car lift is available with optional drive-thru ramps, drip trays and rolling jacks.
Features
- 14,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Heavy-duty turn plates and integrated rear slip-plates included
- Multi-position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” UHMW slider blocks in each column
- Features oversize sheaves and heavy-duty 1/2” aircraft cable
- Rugged 1?3/8” roller axles and oversize self-lubricating cable sheaves
- Multi-position safety locks in each column with push-button safety release
- Runways adjust for different tread widths and feature non-skid surface
- Optional 7,000-lb. capacity bridge jacks available (Model RJ?7) 14,000-lb. lifting capacity
Specifications
Capacity | |
Lifting Capacity* | 14.000 lbs. (6350 kg) |
*Max Capacity / Front Axle | 7000 lbs. (3175 kg) |
*Max Capacity / Rear Axle | 7000 lbs. (3175 kg) |
Rise | |
A - Min. Runway Height: | 7,625" (194 mm) |
B - Max. Rise: | 70" (1778 mm) |
C - Max. Lifting Height: | 77,625" (1972 mm) |
Time to Full Rise: | 60 seconds |
D - Overall Width (FRONT) | 143” (3,632 mm) |
E - Overall Width (REAR) | 130” (3,301 mm) |
F - Outside Length | 215" (5,472 mm) |
G - Overall Length | 243" (6,191 mm) |
H - Height of Columns (FRONT) | 105" (2,664 mm) |
I - Height of Columns (REAR) | 103” (2,613 mm) |
J - Width Between Columns (FRONT) | 123” (3,124 mm) |
K - Width Between Columns (REAR) | 120” (3,046 mm) |
L - Drive-Thru Clearance | 97” (2,464 mm) |
M - Runway Width | 20.5” (520 mm) |
N - Length of Runways | 199" (5,054 mm) |
O - Width Between Runways | 45" (1,143 mm) |
P - Min. 4-Wheel Alignment | 89" (2,261 mm) |
Q - Max. 4-Wheel Alignment | 156" (3,962 mm) |
R - Max. 2-Wheel Alignment | 175" (4,445 mm) |
Minimum Wheelbase | |
Rated Capacity: | 140" (3556 mm) |
75% Capacity: | 120" (3048 mm) |
50% Capacity: | 100" (2540 mm) |
25% Capacity: | 80" (2032 mm) |
Locking | |
Locking Positions: | 13 |
Lock Spacing: | 4 |
Power Unit | |
Motor: | 220 VAC / 60 Hz / 1 Ph |
Noise: | 45 dB |
Shipping | |
Weight: | 3,586-lbs. (1,626 kg) |
Dimensions: | 240'' x 23'' x 41'' (6,096 mm x 584 mm x 1,041 mm) |
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Ranger 3DP4100R Target 3D Pro Imaging Aligner - INCLUDES SET-UP & TRAINING:
3DP4100R Target 3D Pro Imaging Aligner (Complete) INCLUDES SET-UP & TRAINING (5140101)
The Target 3DPro wheel aligner increases productivity by allowing technicians to do more wheel alignments in less time compared to conventional systems. This wheel aligner is perfect for wheel service repair shops handling a high volume of wheel alignments, especially those who would like to see a dramatic increase in profitability. With minimal investment and reduced training, the Ranger Target 3DPro aligner expands your service potential and sends more profit to your bottom line. The ProSpec® feedback that assists technicians in diagnosing problems will help increase your customer satisfaction and improve shop efficiency. The Target 3DPro uses advanced imaging technology that delivers fast and accurate alignments.
The advanced 3DPro Imaging Wheel Aligner System with ProSpec offers:
- Deep Freeze Reboot-to-Restore Technology
- Increase in bottom-line revenue
- 30% average increase in read-rate accuracy
- Fewer costly re-reads and investigations
- Decline in come-backs and customer complaints
- Specially designed for ease-of-use, speed and helpful technician feedback
- Choose from three individual alignment procedures
- Comes standard with start-to-finish computer-guided program
- Quick readings without caster steering angle and/or run-out compensation
Free range measuring for checking individual readings as required screen displays include:
- Front and rear camber (-15º to +15º)
- Front and rear toe (also "super toe”—toe out on turns)
- Front caster (-28º to +28º)
- Individual caster, camber and toe
- Front and rear setback, SAI and thrust angle, included angle
- Elevated 3 Point or rolling run-out compensation
- Elevated adjustments
- Individual zoom readings allows operators to clearly see screen and software function from any wheel position
- Customer database with customer notes and comments
- Before and after adjustment readings
- Visual vehicle adjustment help
- ProSpec software is available in multiple languages. Check for current language availability.
- Optional yearly specification and software updates are available on PC network or by simply installing a new program cartridge.
- Help Menu
Bendpak RJ7W 7,000 Lb. Capacity, Rolling Bridge Jack
RJ7W 7,000-lb. Capacity / Rolling Bridge Jack (5175249)
BendPak’s 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.
Features
- 7,000-lb. lifting capacity
- Easy-Roll Wheels
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
Specifications
Capacity | |
Lifting Capacity | 7,000 lbs. (3,175 kg) |
Suitable Lift Model(s) | HDS-14 Series, HDSO14P, HD-14 Series |
Min. Drive-Over Height* | |
Pad Only: | 4" (102 mm) |
Pad + 2.75" Adapter: | 6.75" (171 mm) |
Pad + 5.5" Adapter: | 9.5" (241 mm) |
Max. Lifting Height* | |
Pad Only: | 14.75" (375 mm) |
Pad + 2.75" Adapter: | 17.5" (445 mm) |
Pad + 5.5" Adapter: | 20.25" (514 mm) |
Reach | |
Support Base Width: | 36.25" (921 mm) - 46.5" (1,181 mm) |
Max. Arm Reach: | 56" (1,422 mm) |
Min. Arm Reach: | 42" (1,067 mm) |
Time to Full Rise: | 55 seconds |
Pump: | Air/Hydraulic |
Air Pressure: | 125 PSI (10-25 CFM) |
Max. Operating Hydraulic Pressure: | 4,550 PSI |
Power Requirement: | None |
Shipping Weight: | 440 lbs. (200 kg) |
Shipping Dimensions: | 42" x 25" x 15" (1,066 mm x 635 mm x 381 mm) |
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.