GMC PRB-55 Angle Roll Bender with Manual Positioning (3 Phase)
Features
- ISO 9001 certified.
- 2” schedule 40 pipe is the maximum bending capacity, 2.5” round tube 14 Ga. and 2” square tube.
- Heavy Duty 3HP AC main motor.
- 1 top forming roll (manually driven).
- 2 driven bottom rolls.
- Robust, all steel and welded framework.
Specifications
| Model | PRB-55 |
| Pipe Capacity | 2” schedule 40 / Min. Dia.24” |
| Tube Capacity | 2-1/2”x14 Ga. (wall) / Min. Dia. 24” |
| Solid Round Tube | 1-3/8” / Min. Dia. 24” |
| Square Tube | 2”x2”x3/16” (wall) / Min. Dia. 24” |
| Solid Square Tube | 1-3/8”x1-3/8” / Min. Dia. 24” |
| Solid Flat Bar | 4”x9/16” (wall) / Min. Dia. 36” |
| Solid Flat Bar | 2-3/8”x3/8” (wall) / Min. Dia. 20” |
| Angle Flat Bar | 2-3/4”x2”x3/8” (wall) / Min. Dia. 47” |
| Angle Iron Leg-In | 2”x3/16”(wall) / Min. Dia. 28” |
| Angle Iron Let-Out | 2”x3/16”(wall) / Min. Dia. 20” |
| T-Iron Leg-In | 2”x3/16” (wall) / Min. Dia. 28” |
| T-Iron Leg-Out | 2”x3/16” (wall) / Min. Dia. 20” |
| Channel Leg-In | 3-1/8”x1-3/4”x3/16” / Min. Dia. 26” |
| Channel Leg-Out | 3-1/8”x1-3/4”x3/16” / Min. Dia. 24” |
| Dia. of Roller | 7 1/2" |
| Dia. of Roller Shaft | 2" |
| Roller Speed | 16 RPM |
| Motor | 3 HP, 220VAC 3-Phase (Optional 440VAC) |
| Dimensions | 40" x 35" x 65" |
| Weight | 1,050 lbs. |
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
