Baileigh DP-0625E Drill Press
This economical belt driven drill press runs smoothly even at full capacity - this 14" drill press lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.
Features
- .5 hp motor requires 110 volt power and will work at any shop or site.
- Belt driven head drills a maximum capacity of 5/8” steel.
- 5 speeds in the range from 250 to 2900 rpm to suit your application.
- 2-7/8" steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- Includes a safety shield around the drill head to protect you.
Specifications
| Model Number | DP-0625E |
| Base Dimensions (In.) | 25-3/4" x 16-1/2" |
| Base Size (In.) | 25-3/4" x 16-1/2" |
| Chuck Size (In.) | Includes B-16 1-16mm Keyless Chuck |
| Column Diameter (In.) | 2-7/8 |
| Drilling Capacity Mild Steel (In.) | 5/8" |
| Input Power | 110 Volt |
| Number of Spindle Speeds | 5 |
| Quill Diameter (In.) | 1-3/4" |
| Shipping Dimensions (L x W x H) (In.) | 69 x 44 x 23 |
| Speeds | 250, 700, 1150, 1900, & 2900 |
| Spindle Distance to Table (Max.) (In.) | 6" Min to 36" Max |
| Spindle Taper | B16 |
| Swing (In.) | 14" |
| Table Size (In.) | 11" x 11" |
| Table Tilt (Deg.) | 360° |
| Distance From Spindle To Base (In.) | 48 |
| Shipping Weight (Lbs.) | 240 |
*Specifications subject to change without notice.
WARNING: California Prop 65
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
CALL US NOW
