JET Tools 725000K JPS-10 10" ProShop 1.75 HP 1 PH 115V 30" Fence System, Cast Wing w/ Riving Knife

JET Tools

Factory Shipped

Total Price:
$2,519.99 $2,099.99
(You save $420.00)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

JET Tools 725000K JPS-10 10" ProShop 1.75 HP 1 PH 115V 30" Fence System, Cast Wing w/ Riving Knife


  • The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contractor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity.


  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration.
  • Low profile riving knife included
  • Motor reset switch conveniently relocated to the power switch, instead of the motor
  • Newly designed arbor lock to change blades quickly and easily
  • On board storage for all included accessories
  • Quick release riving knife for hassle free riving knife changes
  • Redesigned guard for better protection and ease of use


  • Blade Diameter (In.): 10
  • Style (Type): Contractor
  • Arbor Speed (RPM): 4000
  • Maximum Depth of Cut at 45 Degrees (In.): 2-1/8
  • Maximum Depth of Cut (In.): 3-1/8
  • Maximum Diameter of Dado (In.): 8
  • Table in Front of Saw Blade at Maximum Depth of Cut (In.): 8.81
  • Table Size (L x W) (In.): 20 x 27
  • Maximum Rip Right of Blade (In.): 30
  • Maximum Rip Left of Blade (In.): 13-1/2
  • Maximum Width of Dado (In.): 13/16
  • Table Type: Cast Iron
  • Motor Power (HP): 1-3/4
  • Miter Gauge Type: T-Slot with Stops
  • Table Height from Floor (In.): 34-3/4
  • Dust Collection Minimum CFM Required (CFM): 350
  • Dust Port Outside Diameter (In.): 4
  • Motor Phase: 1
  • Motor Voltage (V.): 115
  • Prewired Voltage (V.): 115
  • Motor Amps: 14.8
  • Recommended Circuit Size (Amps.): 20





JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options