iDEAL EV Battery Platform/ Hybrid Component Lift Table
The Ideal Lt-Ev2500Ah-X Is A 2,500 Lb. Portable, High-Rise Commercial & Industrial Grade Air- Hydraulic Platform Lift Table, Incorporating A 'Multi-Adjustable' Ev Platform Primarily Designed To Assist With Controlled Lifting & Lowering Tasks To Safely Remove, Replace Or Service Heavy Vehicle Components, Especially For Electric & Hybrid Vehicles, Such As Ev Battery Packs, Motors, Powertrain Assemblies, Or Other Similar Heavy Components. The Lt-Ev2500Ah-X Comes Standardly Equipped With A Durable Multi-Adjustable Ev Insulated Platform That Includes A Multi-Directional 'Sliding' Platform With Latch Clamps, Along With Tilt & Height Adjustments, While Also Incorporating An Exclusive Fully Operational Pneumatic Hand Operated 'Stainless-Steel' Control Panel With Integrated Air Gauge & Water Separator. In Addition, Ideal Ev 2500 Lb. Lift Table Comes Standard With High-Quality Locking Swivel & Directional Poly Casters, Tool Tray, Removable Hand Bar, Double Lift Scissors, Hd Air-Hydraulic Pump & Hydraulic Cylinder, And Four Rubber Pads All Combined To Provide Maximum Strength, Stability, And Safety For Added Efficiency And Convenience.
Features
- 2,500 Lbs Capacity
- Innovative, High Quality Portable Scissor Lift Design
- Efficient & Safe Method To Install Or Remove Heavy Ev Or Hybrid Vehicle Components Ie: Battery Packs, Motors & Powertrain Assemblies
- Full Operation Air System Hand Controls For Lifting, Locking & Lowering
- Compressed Air / Hp Hydraulic Operation (90 To 125 Psi)
- Integrated Air Gauge W/ Water Separator
- Insulated, Multi-Directional Sliding Ev Platform W/6Ea Adjustable Latch Clamps
- Hd Jack Screws For Precision 'Tilt & Height Platform Adjustments
- Double Scissor Hd Design W/ Hq Hydraulic Cylinder
- Integrated Utility/Tool Tray & Sub-Platform Storage Area
- Durable 'Directional & Locking' 6" Poly Swivel Casters
- Ev Platform Size 59"L X 31.5"W
- 3Ea Locking Height Positions
- Max Pt Platform Height 72.6"
- Min Pt Platform Height 35.4"
- Overall Size 74.6"L X 35.4"W
- 72S Rise & 33S Lower Time
- Includes 4Ea Rubber Pads (6.4"L X 4"W X 1.45"H)
- Durable Powder-Coat Finish
Specifications
| Lift Model | LT-EV2500AH-X |
| Capacity | 2,500 lbs. |
| Overall Length | 74.6" |
| Overall Width | 35.4" |
| Max EV Platform Height | 72.6" |
| Min EV Platform Height | 35.4" |
| Hand Bar Height | 39.2" |
| EV Platform Size (L x W) | 59" x 31.5" |
| EV Platform Adj. Tilt Angle (+/-) | 4° to 8° |
| EV Platform Locking Heights | 49", 61", 68" |
| Lifting / Lowering Rate | 72S/33S |
| Power Supply (Compressed Air) | 90-125 PSI (6 - 9 Bar) |
| Ship Weight |
978 lbs. |
Downloads
TUXEDO DISTRIBUTORS LIMITED WARRANTY
Structural Warranty:
The following parts and structural components carry a five year warranty:
Columns, Arms, Uprights, Swivel Pins
Legs, Carriages, Overhead Beam
Tracks, Cross Rails, Top Rail Beam
Limited One-Year Warranty:
Tuxedo Distributors, LLC (Tuxedo) offers a limited one-year warranty to the original purchaser of Lifts and Wheel Service equipment in the United States and Canada. Tuxedo will replace, without charge, any part found defective in materials orworkmanship under normal use, for a period of one year after purchase. The purchaser is responsible for all shipping charges. This warranty does not apply to equipment that has been improperly installed or altered or that has not beenoperated or maintained according to specifications.
Other Limitations:
This warranty does not cover:
1. Parts needed for normal maintenance
2. Wear parts, including but not limited to cables, slider blocks, chains, rubber pads and pulleys
3. Replacement of lift and tire changer cylinders after the first 30 days. A seal kit and installation instructions will be sent for repairs thereafter.
4. On-site labor
Upon receipt, the customer must visually inspect the equipment for any potential freight damage before signing clear on the shipping receipt. Freight damage is not considered a warranty issue and therefore must be noted for any potential recovery with the shipping company.
The customer is required to notify Tuxedo of any missing parts within 72 hours. Timely notification must be received to becovered under warranty.
Tuxedo will replace any defective part under warranty at no charge as soon as such parts become available from the manufacturer. No guarantee is given as to the immediate availability of replacement parts.
Tuxedo reserves the right to make improvements and/or design changes to its lifts without any obligation to previously sold, assembled or fabricated equipment.
There is no other express warranty on the Tuxedo lifts and this warranty is exclusive of and in lieu of all other warranties,expressed or implied, including all warranties of merchantability and fitness for a particular purpose.
To the fullest extent allowed by law, Tuxedo shall not be liable for loss of use, cost of cover, lost profits, inconvenience,lost time, commercial loss or other incidental or consequential damages.
This Limited Warranty is granted to the original purchaser only and is not transferable or assignable.
Some states do not allow exclusion or limitation of consequential damages or how long an implied warranty lasts, so the above limitations and exclusions may not apply. This warranty gives you specific legal rights and you may have other rights, which may vary from state to state.
