Dent Fix Equipment DF-SP820 Slot Punch 8 X 20 Mm
The Slot Pliers (DF-SP820) from Dent Fix Equipment are an essential tool when MIG brazing high strength steel (HSS) and ultra high strength steel (UHSS) parts for repair. MIG brazing is recommended when joining HSS/UHSS parts together because of its low weld temperature which is ideal when working with these types of materials and the brazing method maintains the integrity of the parts.
Most outdated training courses recommend punching two holes side-by-side then removing the middle section with a die grinder creating about a 8x20mm slot which is used to MIG braze around the edges joining the parts together. Instead of wasting the time with the old slot generation method, newer courses utilize the Dent Fix Slot Pliers which creates a faster result and only needs one tool. The 8x20mm sized slot is being recommended in Land Rover and Jaguar's HSS/UHSS repair processes.
Slot punch can punch up to 2mm of aluminum.
Tool Specs
Length: 13.5"
Width: 1.75"
Height: 3.25"
Weight: 4.8 lbs
Slot Dimension: 8x20mm
Country of Origin: Denmark
WARRANTY POLICY
Used Product Warranty Claims: A product is considered used when it has been used for more than 1 week and is no longer re-sellable. All used product warranty claims are to be returned to Dent Fix freight pre-paid. All used product will be repaired or replaced and returned to you via regular freight pre-paid. Expedited return shipments are sent freight collect. Whether to repair or replace is at our sole discretion.
Air Tools: All our air tools carry a 1-year warranty against manufacturing defects. Customer abuse, such as a lack of proper maintenance, and the damage caused therein is not covered under warranty.
?
Consumable: Any item that by its nature or design that wears, gets used up or is permanently changed by its usage is considered a consumable item. Drill bits are a consumable item and as such carry no warranties expressed or implied. There are several procedures the user can implement in order to extend drill bit life, but ultimately the drill bit will break or dull. It is up to the technician to ensure proper usage.
Items with Specific Warranties:
DF-1 Stud Welder: Lifetime – Chuck of slide hammer & Transformer. 5 year – Trigger switch.
DF-505 “The Maxi”: 5 years on internal components.
DF-601 Surge Protector: Lifetime – return for replacement if red L.E.D. does not light.
DF-900W Aluspot Stud Welder: 5 Years - Internal components.
DF-SPR67 Self-Piercing Riveter: 1 Year - Internal components.
DF-EZN1 & DF-EZN1G EZ Nitrogen Welders - 5 Years - Internal components.
Other warranties may apply, please check your product sheet for more information. This warranty does not apply where: repairs have been made or attempted without the assistance of or by an authorized Dent Fix Repair Center; repairs are required because of normal wear and tear; the tool has been abused or misused or improperly maintained; alterations have been made to the tool.
In no event shall DENT FIX be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of the warranty.
DENT FIX disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose”, after the term of this warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
?
QUESTIONS PLEASE CALL 800-562-4791
