Corghi Service Pro 426 Truck Tire Changer+cust - 230V 1 phase (0-12102102/00 - 230V 3 phase)
Electrohydraulic tyre changer for rim sizes up to 26” for demounting and mounting tyres with or without inner tubes for trucks, buses and industrial vehicles. Manual arm lifting and tool tipping.
Specifications
| Technical Data | Service Pro 426 |
| Max. Wheel Diameter | 59" (1500 mm) |
| Max. Wheel Width | 30.7" (780 mm) |
| Chuck Clamping Capacity | 14” - 26” |
| Min. Diameter of the Wheel’s Centering Hole | 4.7" (120 mm) |
| Max. Wheel Weight (Assembly) | 1543 lb (700 kg) |
| Bead Breaking Force | 16000 N / 3597 lbf |
| Max. Torque Delivery | 2600 Nm / 1918 lbf |
| Chuck Rotation Speed | 6 rpm |
| Working Pressure | 130 bar / 1885 psi |
| Motor Power | 8 - 12bar/116psi |
| Motor Power | 370 W |
| Power Supply | 230V - 1ph - 50/60Hz |
| 230V - 3ph - 60Hz | |
| Machine Dimensions | 82” L x 71.6” D x 48” H |
| Machine Weight | 1058 lbs (498 kg) |
Downloads
CORGHI USA Limited Warranty
General Terms
Corghi USA expressly warrants its products will be free from defects in material and/or workmanship for the time period specified. Corghi USA must be informed in writing within 7 days after discovery of a defect. Corghi USA reserves the right to repair or replace a product at our discretion. Co nsumable products and accessories such as but not limited to; plastic protection parts, bead breaker pads, inflation hoses, and rollers, are not covered under this warranty.
This warranty does not cover any damage resulting from abuse or failure to perform any necessary maintenance (i.e. damage due to or resulting from, faulty installation, neglect, misuse, improper electrical connections or electrical surges, problems resulting from excessive water, contaminated air system, or pollutant of any nature, fire or freight damage).
Corghi machines are warranted to be free of defects as follows:
Tire Changers:
A2030, A2024TI, 2024TI LL, A9824TI, A9824 LLTI, A9830, A9222TI, Service Pro 124, Service Pro 324 - 2 year parts and 1 year labor. Transmission – 10 year part only (5 year part only on 9220TI).
AM50, AM500, AM5000, AM26, Master J, Master Code, Master28 – 2 year parts and 1 year labor.
HD700, AG52L, HD1200, Monster TT – 2 year parts and 1 year labor.
NOTE: Rubber Pads, air lines, gauges, mount/demount heads, and swabs - 90 day warranty
Tire Balancers:
PL60, Service Pro 750, EM9250, EM9280, EM9580, EM9550, EM9980C, Eyelight – 2 year parts and 1 year labor.
ET66, ET88 – 2 year parts and 1 year labor.
Alignment Machines/Specialty Equipment:
2 year parts and 1 year labor.
Disclaimer & Limitation on Liability.
Corghi USA agreement to repair a tire changer or balancer is expressly in lieu of all other warranties, express, implies or statutory, including any warranties for merchantability and fitness for a particular purpose. Corghi USA maximum liability shall be limited to the cost of the machine. In no event shall Corghi USA be responsible for owner’s lost profits, goodwill or other incidental or consequential damages. Corghi USA is not responsible for equipment or accessories damages in shipment. Freight claims are to be made directly with the carrier. We will be more than happy to assist you with any questions regarding filing claims.
