Challenger Lifts: 2 post car Lift
The Challenger Lifts brand is known for its high-quality 2 Post Lifts, offering reliable and durable solutions for both professional and home garages. The Challenger 2 Post Lift is designed to provide excellent lifting capacity and stability, perfect for vehicle maintenance and repairs. Whether you're looking for a 2 Post Car Lift or a general 2 Post Lift for your workshop, these lifts are engineered for safety and efficiency. If you're in the market, check out a 2 Post Lift for Sale from Challenger for superior performance and value.
Features
- Accommodate a wide range of standard cars, trucks, vans, and SUVs within the same service bay with +6″ & +12″ width adjustment (during installation)
- Alternative versions +1′ column height extension & +2′ column height extensions available for purchase
- 3-Stage front and rear arms
- premium telescoping footpads.
- Adjustable Height
- Adjustable Width
- Geared Arm Restraints
- Single-Point Mechanical Lock Release System
- Oversized Steel Pulleys
- 60" Lifting Carriage
- Padded Overhead Shut Off System
- Enhanced Screw Pads
- New Textured Powdercoating
- Premium telescoping screw pads adjust to multiple heights minimizing the need for additional adapters.
- Adjustable columns allow for flexibility during installation.
- Optional dual pendant controls improve spotting accuracy and allow lifting control from either column.
Specifications
| Model Number | CL12A |
| Lifting Capacity | 12,000 lbs. |
| Lifting Configuration | Symmetric |
| Ceiling Height Required | 14' 3" Minimum |
| Speed of Rise (approximate) | 63s |
| Rise Height | 84.75" |
| Floor to Overhead Switch | 12' 8" or 13' 2" |
| Overall Height | 13' 2" or 13' 8" |
| Screw Pad Height * | 5" - 6.625" |
| Arms | 3-stage front/3-stage rear |
| Arm Reach (Max.) | 59” |
| Arm Reach (Min.) | 27.5” |
| Adjustable Width Overall | 142" / 148" / 154" |
| Drive-Thru Clearance | 103.5”, 109.5" or 115.5" |
| Inside Columns | 114.5" / 120.5" / 126.5" |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
| Colors Available | Red, Blue, Black |
| ALI® Certified | Yes |
Optional Accessories (sold separately)
| Part No. | Description |
| B2270 | Standard Footpad |
| B2260 | Round Rubber Footpad |
| B2280PR | GM ® Truck Footpad Set |
| TFPK | Electric Vehicle Footpad Kit |
| 10316 | Organizer Rack |
| B99700 | Tire Tool Center |
| B2206-3 | 3" Adapter |
| 10313 | 6" Adapter |
| 10314 | Frame Adapters |
| 10333 | Sprinter Kit |
Downloads
Other Models
| Model Number | CL12A | CL12A-1 | CL12A-2 | CL12A-LC |
| Lifting Capacity | 12,000 lbs. | 12,000 lbs. | 12,000 lbs. | 12,000 lbs. |
| Lifting Configuration | Symmetric | Symmetric | Symmetric | Symmetric |
| Ceiling Height Required | 14' 3" Minimum | 15' 3" Minimum | 16' 3" Minimum | 12' Minimum |
| Speed of Rise (approximate)** | 63s | 63s | 63s | 60s |
| Rise Height | 84.75" | 84.75" | 84.75" | 80.75" |
| Floor to Overhead Switch | 12' 8" or 13' 2" | 13' 8" or 14' 2" | 14' 8" or 15' 2" | 11' 4.5" |
| Overall Height | 13' 2" or 13' 8" | 14' 2" or 14' 8" | 15' 2" or 15' 8" | 11' 11" |
| Screw Pad Height * | 5" - 6.625" | 5" - 6.625" | 5" - 6.625" | 5" - 6.625" |
| Arms | 3-stage front/3-stage rear | 3-stage front/3-stage rear | 3-stage front/3-stage rear | 3-stage front/3-stage rear |
| Arm Reach (Max.) | 59” | 59” | 59” | 59" |
| Arm Reach (Min.) | 27.5” | 27.5” | 27.5” | 27.5" |
| Adjustable Width Overall | 142" / 148" / 154" | 142" / 148" / 154" | 142" / 148" / 154" | 142" / 148" / 154" |
| Drive-Thru Clearance | 103.5”, 109.5" or 115.5" | 103.5”, 109.5" or 115.5" | 103.5”, 109.5" or 115.5" | 103.5”, 109.5" or 115.5" |
| Inside Columns | 114.5" / 120.5" / 126.5" | 114.5" / 120.5" / 126.5" | 114.5" / 120.5" / 126.5" | 114.5" / 120.5" / 126.5" |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph |
| Colors Available | Red, Blue, Black | Red, Blue, Black | Red, Blue, Black | Red, Blue, Black |
| ALI® Certified | Yes | Yes | Yes | Yes |
* Lift capacity ratings are based on loads equally distributed on all four arms.
** Lifting and lowering speeds may vary depending on the weight of the vehicle.
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
| Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
| CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
| 10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
| 12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
| 8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
| 10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
| 12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
| 14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
| 15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
| 30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
| 30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
| Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
| Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
| Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
| Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
| Accessories | 90 days | No | |||
| Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.
