AMGO Hydraulics DX-12A 12000 Lbs Double Scissors Alignment Lift

AMGO Hydraulics

Please contact us at 800-562-4791 for pricing and availability.
Calculated at Checkout
12,000 Lbs
Total Price:
MSRP: $14,850.00
(You save  $2,475.00 )
Adding to cart… The item has been added
Shipping Calculated at Checkout Factory Shipped

AMGO Hydraulics DX-12A 12000 Lbs Double Scissors Alignment Lift

The AMGO DX-12A Double Scissors Lift is the ideal lift for easily and conveniently lifting all wheels off the runway for brake, tire, suspension and two or four-wheel alignment work. The DX-12A is made stronger, more versatile, and easier to use and can lift 12,000lbs.


  •  Turn plates are not standard. Must be purchased separately
  •  12,000lbs capacity for main scissor lift and 9,000lbs capacity for secondary scissor lift
  •  Synchronization cylinders system equipped with hose burst valves
  •  Safety stop device at the height of 11 3/4″, both control buttons are needed to lower the lift from 11 3/4″ to ground, with tone alarm for added safety
  •  Skid proof diamond runways and optional adjustable turnplate pockets
  •  Self-lubricating UHMW polyethylene sliders and bronze bushings


 Model  DX-12A
 Main Scissor Lifting Capacity  12,000 lbs (5,500 kg)
 Lifting Time  63S
 A1: Max. Lifting Height  73 5/8″ (1870mm)
 A2: Minimum Height  12 5/8″ (320mm)
 B: Runway Length  196 1/2″ (4991mm)
 C: Overall Width  86 1/4″ (2190mm)
 D: Width Between Runways  37″ (940mm)
 E: Overall Length(Inc.Ramps)  257″ (6527mm)
 F: Min.Four Wheel Align  85 7/8″ (2180mm)
 G: Max.Four Wheel Align  166 1/2″ (4230mm)
 H: Max.Two Wheel Align  172 7/8″ (4390mm)
 Secondary Scissor Lifting Capacity  9,000lbs (4000kg)
 I: Secondary Scissor Lifting  Height  16 1/2″ (420mm)
 J: Secondary Scissor Length  63″~74″ (1600~1880mm)
 Gross Weight  5,706 lbs (2,588 kg)
 Motor  2.0HP 220V/60Hz Single Phase


Shipping Information




Warranty information.

AMGO offers one of the best product warranties in the industry from the original factory commercial invoice date in the industry as follows: 
1.Steel structure components(including Columns,Carriage,,Lifting Arms, Top Beam, Floor Cover,Platform,Cross Beam,Car Drive-in Ramp, Scissor,baseframe etc.) warranty for five years. 
2.Hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.)warranty for two years. 
3.Other parts(no including consumption parts such as rubber pad),electrical components, power unit warranty for one year.

Warranty procedure:

In order to start a warranty claim, you need fill out completely (including date of purchase) the warranty card attached below, and then send it to If this information is not provided, the factory will not support the claim.

Click here to download the warranty card