Challenger Lifts CL10V3-DPC Versymmetric 10000 Lbs 2-Post Car Lift W/ Dual Pendant Controls

Challenger Lifts

Factory Shipped
Free Shipping
10,000 Lbs
  • Challenger Lifts 10315 Stack Adapter Kit For 10000 And 12000 Lb Lift
  • Challenger Lifts B10264A Air/Electric Workstation With Filter/Lubricator and regulator
Total Price:
MSRP: $14,732.42
(You save  $5,303.67 )
Adding to cart… The item has been added

Lifts CL10V3-DPC Versymmetric 10,000 Lbs 2-Post Car Lift W/ Dual Pendant Controls

*Extra accessories shown in the pictures are sold separately

CL10V3 Series

Challenger’s CL10V3 model features our exclusive Versymmetric technology to allow you to service the widest range of vehicles and maximize your bottom line. 3-stage front and 3-stage rear arms with our industry-first directSPOT design eliminate the need to shuffle a vehicle back and forth to swing the front arm clear of the tire to reach recommended lift points. Accurate first-try spotting will boost your productivity as well as reduce frustration in your shop.

We also offer the CL10V3 in several configurations to meet your service application needs. A drive-on pad option provides the quickest vehicle spotting for express bays. Our added Quick Cycle™ models can rise in just 27 seconds and lower in only 17 seconds. Quick Cycle™ technology’s increased lift speed will drastically boost your service potential. Adjustable height and width options are also available. In addition, choose between a wide range of accessories to make the CL10V3 the perfect choice for your shop. Expand your service potential with our most versatile, easy-to-operate lift.


  • Dual Pendant Controls
  • 10,000 lb. lift capacity
  • Versymmetric offset front arms provide directSPOT to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential
  • Oversized 5 in. diameter pulley and heavy duty 5/16 in. cable reduces stress on equalization system and increases cable life
  • 48 in. elongated carriage design increases lift life
  • Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
  • Padded overhead shut off system prevents vehicle damage
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • Fully gusseted base plate design increases column rigidity
  • Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
  • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
  • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
  • Premium powder coat finish provides long-lasting durability

Specific Features of CL10V3-DPC

 Model Number  CL10V3-DPC
 Lifting Capacity  10,000 lbs.
 Lifting Configuration  Versymmetric (Symmetric & Asymmetric)
 Arms  3-stage front/3-stage rear
 Rise Height  74.125”
 Overall Height  134” / 140”
 Overall Height (Cylinder Extended)  143”
 Overall Width  138.5” / 143”
 Drive-Thru Clearance  100” / 104.5”
 Floor to Overhead Switch  128.5” / 134.5”
 Front Arm Reach  20” - 42”
 Rear Arm Reach  37.625” - 60”
 Screw Pad Height  3.875” - 6.125”
 Inside Columns  110” / 114.5”
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise  38 s
 Ceiling Height Required  12'
 ALI/ETL Certified  Yes
 Quick Cycle  -
 Dual Pendant Controls  Yes
 Colors Available  Red, Blue, Black

Additional Parts and Accessories Sold Separately

Productivity Accessories
 Part No.  Description
 B10264A  Air/electric workstation with filter/lubricator/regulator
 B99700  Tire Tool Manager Work Station with filter/lubricator/regulator
 TR-07  Turf Rail Quick Change Attachment
Power Upgrades
 Part No.  Description
 3PH217  Power Unit Upgrade to 3-Phase - 208V
 3PH239  Power Unit Upgrade to 3-Phase - 230V
 3PH469  Power Unit Upgrade to 3-Phase - 460V
Footpad Accessories
 Part No.  Description
 B2280PR  NEW wide frame footpad
 CLXP9  Low-profile Express Service Pad
 10300  Pair of luxury car adapters
 10313  Pair of 6 in. stack adapter extensions
 10315  Stack adapter kit - includes (4) 3 in. Stack Extensions, (2) 6 in. Stack Extensions & (2) Organizer Racks with hardware
 10316  Organizer rack for stack adapter extensions
 B2260  Round rubber-style double screw foot pad assembly. For use on 10k 2-post lifts only, 2,500 lb capacity per footpad.


Other Models

 Model Number  CL10V3  CL10V3-DPC  CL10V3-QC  CL10V3-DPC-QC
 Lifting Capacity  10,000 lbs.  10,000 lbs.  10,000 lbs.  10,000 lbs.
 Lifting Configuration  Versymmetric (Symmetric &   Asymmetric)  Versymmetric (Symmetric &   Asymmetric)  Versymmetric (Symmetric &   Asymmetric)  Versymmetric (Symmetric &   Asymmetric)
 Arms  3-stage front/3-stage rear  3-stage front/3-stage rear  3-stage front/3-stage rear  3-stage front/3-stage rear
 Rise Height  74.125”  74.125”  74.125”  74.125”
 Overall Height  134” / 140”  134” / 140”  134” / 140”  134” / 140”
 Overall Height (Cylinder Extended)  143”  143”  143”  143”
 2’ Height Extension Available  Yes  Yes  Yes  Yes
 3’ Height Extension Available  Yes  Yes  Yes  Yes
 Overall Width  138.5” / 143”  138.5” / 143”  138.5” / 143”  138.5” / 143”
 Drive-Thru Clearance  100” / 104.5”  100” / 104.5”  100” / 104.5”  100” / 104.5”
 Floor to Overhead Switch  128.5” / 134.5”  128.5” / 134.5”  128.5” / 134.5”  128.5” / 134.5”
 Front Arm Reach  20” - 42”  20” - 42”  20” - 42”  20” - 42”
 Rear Arm Reach  37.625” - 60”  37.625” - 60”  37.625” - 60”  37.625” - 60”
 Screw Pad Height  3.875” - 6.125”  3.875” - 6.125”  3.875” - 6.125”  3.875” - 6.125”
 Inside Columns  110” / 114.5”  110” / 114.5”  110” / 114.5”  110” / 114.5”
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph  2HP, 208v-230v, 60Hz, 1Ph  3HP, 208v-230v, 60Hz, 1Ph  3HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise  38 s  38 s  27 s  27 s
 Ceiling Height Required  12'  12'  12'  12'
 ALI/ETL Certified  Yes  Yes  Yes  Yes
 Quick Cycle  -  -  Yes  Yes
 Dual Pendant Controls  -  Yes  -  Yes
 Colors Available  Red, Blue, Black  Red, Blue, Black  Red, Blue, Black  Red, Blue, Black

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc.,

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.


Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No

Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.

Videos Hide Videos Show Videos