Free Shipping

Bendpak HDS-18EA 18,000-Lb. Capacity Alignment, Standard Four-Post Truck Lift

$19,900.00
$19,900.00
$16,215.00
(You save $3,685.00 )
Brand:
SKU:
5175969
Availability:
Factory Shipped
Shipping:
Free Shipping
Capacity:
18,000 Lbs
  • Bendpak DP-30 18 Gallon Rolling Drain Pan

BendPak HDS-18EA 18,000-lb. Capacity Alignment, Standard Four-Post Truck Lift

You’re now looking at the largest-capacity alignment lift we make. 18,000 lbs. of lifting power is made possible by manufacturing our cable sheaves, base columns and base plates to be as robust and durable as possible. Of course, it’s all 100% ALI Certified for your safety. When you need to align truck wheels, from light-duty all-terrain trucks all the way to massive dumpster trucks and smaller flat-beds, BendPak’s free-floating slip plates and galvanized steel turn plates make the job easy to get done right the first time.

Features:

  • 18,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Multi-caster slip plates
  • Spring-loaded automatic safety locks
  • Supersized 12" diameter cable sheaves
  • Four stainless steel lifting cables
  • Grease nipples on every sheave and axle
  • Single hydraulic under-runway cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder coat finish
  • Push-button pneumatic lock release
  • Secondary lock system on constant guard
  • Enclosed cables, airlines, safety latches
  • Multiple adjustable locking positions
  • Maintenance-free power system
  • Conveniently located controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jacks available

qh.jpgSpecifications:

Capacity

  • Lifting Capacity*: 18,000 lbs. (8,165 kg)
  • *Max Capacity / Front Axle: 9,000 lbs. (4,082 kg)
  • *Max Capacity / Rear Axle: 9,000 lbs. (4,082 kg) 

Rise

  • A - Min. Runway Height: 10.5" (267 mm)
  • B - Max. Rise: 60" (1,524 mm)
  • C - Max. Lifting Height: 70.5" (1,791 mm)
  • Time to Full Rise: 75 seconds 

Outside Dimensions

  • D - Overall Width: 154" (3,912 mm)
  • E - Outside Length: 257" (6,528 mm)
  • F - Overall Length: 297" (7,544 mm)
  • G - Height of Columns: 93" (2,362 mm)

Inside Dimensions

  • H - Width Between Columns: 134" (3,404 mm)
  • I - Drive-Thru Clearance: 109" (2,769 mm)

Runways

  • J - Runway Width: 22" (559 mm)
  • K - Length of Runways: 263" (6,680 mm)
  • L - Width Between Runways: 38" (965 mm) or 56" (1,422 mm)

 Alignment

  • M - Min. 4-Wheel Alignment: 83" (2,108 mm)
  • N - Max. 4-Wheel Alignment: 138" (3,505 mm)
  • O - Max. 2-Wheel Alignment: 211" (5,359 mm)

 Minimum Wheelbase

  • Rated Capacity: 185" (4,699 mm)
  • 75% Capacity: 160" (4,064 mm)
  • 50% Capacity: 135" (3,429 mm)
  • 25% Capacity: 110" (2,794 mm)

 Locking

  • Locking Positions: 9
  • Lock Spacing: 6

 Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB

ACCESSORIES:

WSA-100

WSA-100
(5210436)
 

*Shipping is FREE to direct points within the 48-contiguous states. 

**Bendpak charges taxes to California** 

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone 

***It is the buyer's responsibility to unload the freight at their location. 

****The Bendpak XPR-10-168 is an ALI Certified Lift. Click here to view its certification.