BendPak 10APX-181 PRO 10K Capacity 2-Post Lift Package (Extended Height)

The 10APX-181 PRO-Series has been meticulously crafted to future proof your shop. Incorporating all the essentials for optimal vehicle servicing, this groundbreaking lift is able to effortlessly accommodate EVs. It also seamlessly transitions between symmetrical and asymmetrical configurations. The 10APX-181 PRO high-rise lift sports an overhead beam height of 181” to accommodate high-roof cargo vans.

Features

• Durable powder coat finish.
• Expandable top beam accommodates wide or narrow drive-thru configurations.
• Double-telescoping screw pads offer increased versatility.
• Padded overhead safety shutoff bar.
• Exclusive Bi-Metric arm design for more versatile arm positioning.
• Single-point safety release.
• Drop-end arms provide a lower pad height.
• Dual hydraulic direct-drive cylinders.
• Oversized 53" & 59" tall carriages for superior strength and durability.
• Electric / hydraulic HVLP power system.
• Self-lubricating dura-glide UHMW polyethylene bearing system.
• Safety locks in each column spaced every 3".
• Automatic arm restraints withstand over 2000-pounds of side force.
• 3/8"(10mm) High-strength multi-strand galvanized steel equalizing cable.
• Oversized cable sheave diameter reduces cable fatigue.
• Four triple-telescoping arms.
• ALI certified.

Included: 

• 10APX-181 Two-Post Lift
  
• Frame Cradle Pads
• Medium Adapters
• Tall Adapters
• Air-Electric Workstation

Specifications

Model  10APX-181 PRO  Lifting capacity  10,000 lbs. / 4,536 kg  Max. Capacity  5,000 / 2,268 kg (Front Axle) 5,000 / 2,268 kg (Rear Axle)  A – Max. Rise  75.5 in. / 1,918 mm  B – Lifting Height  79.5 in. / 2,019 mm  C – Max. Lifting Height  89 in. / 2,261 mm  D – Min. Height  4 in. / 102 mm  E – Overall Height  181 in. / 4,597 mm  F – Overall Width  135 in. / 3,431 mm (Narrow) 145 in. / 3,683 mm (Wide)  G – Outside Columns  127.5 in. / 3,238 mm (Narrow) 137.5 in. / 3,492 mm (Wide)  H – Inside Posts  108.5 in. / 2,756 mm (Narrow) 118.5 in. / 3,010 mm (Wide)  I – Drive-Thru  92 in. / 2,337 mm (Narrow) 102 in. / 2,591 mm (Wide)  J – Floor to Top Switch  176 in. / 4,470 mm  K – Front Arm Reach  22 in. / 559 mm (min) 47.5 in. / 1,206.5 mm (max)  L – Rear Arm Reach  29.5 in. / 750 mm (min) 57 in. / 1,448 mm (max)  Max. load per Lift Arm  2,500 lbs. / 1,134 kg  Screw Pad Adjustment  2 in. / 51 mm  Time to Full Rise  ≈ 45 seconds  Motor  220 VAC, 60 Hz, 1 Phase  Sound  <70 dB

*Specifications subject to change without notice

WARNING: Cancer and Reproductive Harm

Downloads

 Manual

 Brochure

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.