Baileigh VM-1258-3 vertical mill


Factory Shipped

Total Price:
$52,305.71 $43,089.00
(You save $9,216.71)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Baileigh VM-1258-3 vertical mill

The VM-1258 vertical mill features a whopping 12” x 58” table, one of the largest you will find on any manual mill. This large oversized table isn’t just mounted on a wimpy machine either. The whole machine has been built to reflect the size and weight that this table brings.

In order to build a machine this big, rigidity has to come into the equation. Baileigh industrial uses only best castings as the starting point for their mills. The stronger you make he platform the better the cutting is. From there we selected one of the best spindle packages available, with an NST 40 spindle. A larger spindle is stronger and has tighter tolerances over a longer period of time. In order to spin a heavy duty spindle like that we decide to go with a Yaskawa® inverter powered by a 5hp 220 volt three phase motor. The inverter lets the operator chose his RPM from 80 to 3800 rpm. Being able to choose the correct rpm will make for longer lasting tooling and better cuts.

Movement on the three axis are powered to make it easier to operate. The X and Y axis also has a Mitutoyo® digital read out as a standard feature. No need to install it yourself, it is already done at the factory. The X and Y axis also have square slide ways with covers and ball screws for the best movement available. A flood coolant system, air draw bar, and central lubrication system are all factory installed on the VM-1258.


 Item Number  VM-1258-3
 Table Size  58" x 12"
 Spindle Center To Column Min Max  5.11" – 21.65"
 Spindle Diameter  3.93"
 Spindle Feed Per Rev  .0035"/.07"/.14"
 Spindle Head Swivel  45° (F&R) 90° (R&L)
 Motor Spindle  5 hp
 Travel Auto X Axis  36.22"
 Travel Auto Y Axis  14.96"
 Travel Auto Z Axis  17.71"
 Travel Manual X Axis  36.61"
 Travel Manual Y Axis  15.74"
 Travel Manual Z Axis  17.71"
 Spindle Nose To Table Min Max  1.37" – 19.09"
 Spindle Speed  80 – 3800 rpm
 Spindle Taper  NT 40
 Table Load Capacity  770 lbs.
 T Slots  .625"
 Motor Coolant  1/8 hp
 Cross Travel Of Ram  16.53"
 Power  220V / 3-phase
 Shipping Weight  4300lbs
 Spindle Travel  5.51"
 Shipping Dimensions (Inches)  73x66x83

*Specifications subject to change without notice.


Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791

Frequently Bought Together

Please choose options for all selected products

  • Choose Options