Baileigh SN-F11-AN Corner notcher
The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is a great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11-gauge mild steel capacity, so it can make quick work of most any job. And like its hydraulically operated brother, the SN-F09-MS, the SN-F11-AN pneumatic notcher has blades that are fixed at 90°, ensuring a perfect notch every time. An oversized table measuring 18” x 23.5” includes table guides, standard, to make production notches.
The 5” blades on the SN-F11-AN corner notcher can be resharpened many times for even more life and cost savings. The SN-F11-AN air-operated sheet metal notcher can run off of any air compressor that can put out between 90 and 115 PSI, which should allow this great tool to be used anywhere. An operator-controlled foot pedal controls the notching action on the SN-F11-AN. At an operating pressure of 115 PSI, the SN-F11-AN is capable of producing 50 strokes a minute with reduced stroke length.
|Table Size||18" x 23.5"|
|Max. Flow Rate||4.4 CFM|
|Notch Angle||90° (Fixed)|
|Working Pressure||115 psi|
|Strokes Per Minute||50|
|Max. Capacity||11 ga. (15 ga.)|
|Shipping Dimensions (Inches)||48x45x59|
|Max Notch Dimensions||5" x 5"|
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791